HOME > ZQUSB CONTROLLER KIT > ZQ-300009 > RETURN

NEW CALMOTION USBCNC-INT USB CONTROLLER KIT



For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
Dale.Granger@exfactory.com
If not available, try his/her backup:
Marvin Spehar ext.452
Marvin.Spehar@exfactory.com
Brand:  

CALMOTION

Model:   USBCNC-INT
Machine Type:  

USB CONTROLLER KIT

Year of Mfg.:   2021
Condition:   Brand New w/Warranty  
Elect./Voltage:  
EXF #:   ZQ-300009
List Price:   $ 499  
Our Price:   $ 499 USD     (Convert)
Description:    (view full)

CALMOTION USBCNC-INT  USB Controller Kit 


  • USB directory listing
  •  DNC (drip feed) operation with single button repeat operation
  • Tape input for file loading into CNC memory
  • Punch CNC memory file to USB key
  • Baud rate configurable
  • Data bit, parity and stop bit configurable
  • Hardware and software flow control
  • XMODEM capable
  • End of block character control
  • Optional end of block delay
  • Start of transmission character
  • End of transmission character
  • 4 line LCD display with adjustable backlight for easy viewing
  •  Industrial rated keypad and display

    Product Description:

    The universal pendant mount USBCNC-INT allows for easy upload and download of CNC g code files to just about any control. DNC functionality is built in for programs that exceed the internal memory size of a machine tool. The USBCNC disk reader control acts as an interface between commercially available USB flash memory and any CNC control with an available RS-232 port. Machine tool files can be sent from CNC memory to the USB key, USB key to CNC memory or drip fed (DNC) from the USB key. Flexible DNC firmware is built into the USBCNC unit allowing connection to just about any machine tool CNC control.

    The pendant mount USB controller kit contains all the necessary hardware to integrate a universal display onto a CNC machine tool pendant. The controller is DIN rail mountable inside the pendant or can be reverse mounted on the display. The USBCNC integral DNC software eliminates having to place a computer with DNC software in a machine shop environment where it can get damaged. Many job shops try to avoid this and place their PC’s in a safer location. Doing so, however, increases the risk of communication errors and forces many operators to run at lower baud rates due to long cable runs. Positioning the USBCNC controller close to the control allows the machine to run at its maximum baud rate and eliminates an operator from having to run back and forth from PC to machine.
Special Note:
Comment:
Written By: Bill Merrigan  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.