For Immediate Help Contact:
Tony Cornacchione
(800) 374-5009 ext. 432
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Dan Wolters ext.376
EXF #:   VC-300002  


Model:   CUTMATE-3400D
Machine Type:  


Year of Mfg.:   2021
Condition:   Brand New w/Warranty  
Elect./Voltage:   230/460 V, 60 Cy, 3 Ph.
List Price:   $ 86,000  
Our Price:   $ 85,800 USD     (Convert)
Financing: $ 1,715 National Capital Leasing
Description:    (view full)

INNOVATOR (SAVI) CUTMATE 3400D Double Knife Guillotine suitable for veneer, paper and plastics.

  • Overall Specifications: Cutting Length: 3400 mm (134");  Daylight Opening: 80 mm (3.15"); Veneer Thickness of Single Sheet: Max. 0.001"  (2.5 mm ) recommended use with TrimEasy for more than 1.2 mm (0.047"); Cutting Width: 30 - 470 mm (1.18" -  18.5" ).
  • Includes:  Fully hydraulic on both knives and pack beam.  Ability to use front knife individually. Pack beam powered by (2) cylinders and (4) firm guides.   Adjustable pressure on hydraulic knives and pack beam for all kinds of veneers  Hydraulically driven rear fence for adjustment of the veneer pack to minimize waste. 
  • Features:  With double knives the cutting accuracy is obtained by the fact that the whole veneer bundle is fully under pressure while cutting so that buckles in the veneers will be straightened out. Double knife is particularly useful when cutting wavy veneer bundles. Cutting accuracy is ensured by the fact that the whole bundle is fully under pressure while cutting so that the bundles will be kept square. The cutting movement takes place on both sides of the veneer edges at the same time., thus parallel cutting is ensured. Simultaneous cut by two blades save production time and shortens work cycles.  Precise linear and parallel cutting. Constructed with a view to the highest European safety standards and security of the operator. Safety light barrier of knife and pack beam in front. Safety light barrier at the rear of the machine for safety concerns. "Safety Locker" at the front end of the knife beam (unique and only in INNOVATOR’s guillotines).  Specially designed “emergency valve” on knife to minimize operational danger caused by mechanical faults. Extra safety valve on knife beam with additional safety knife protective cylinder to prevent any drop of knife. 
    High speed movement of the firm work table by servo motor and (3) sets linear guides and (2) sets of balls crews.
  • MITSUBISHI PLC control system. Optimizing program including Manual Cut; Direct Prog.  ode; Final Width Mode, etc. User-friendly touch screen control panel with more ant (50) sets of veneer width settings at the same time in a direct program mode.
  •  Optional Extra: Second-Cut Technology.  Second-Cut for thick or especially hard species of veneers. By switching knife beam to second-cut mode, a thin clip of approx. 1 mm is cut off from the veneer pack after the first trim. Another INNOVATIVE unique feature. ...... ........................................Added Price $7,200.
    Movable laser line  .........................................................................................................Added Price US  $3,900.
  • Electrical Power: Total Load: Approx 11 KW.  Hydraulic motor: 10 HP.
  • Overall Dimensions/Weight: Dimensions (L x W x H): 5100 x 1800 x 2000mm (201" x  71" x  79");  Net Weight: approx. 8080 Kg.(17,775 Lbs.) Tools and manuals included.

Special Note:
Written By: Tony Cornacchione  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.