CANTEK MODEL MRS-175 6.9” THICK CUTTING HEAVY-DUTY GANG RIPSAW:
- Massive cast iron base provides incredible absorption characteristics for high quality deep cutting operations
- Precision chain and rails (dip chain) system facilitates straight line cutting
- Equipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and improved cut quality.
- Motorized saw arbor and thickness adjustment for operator convenience.
- Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood.
- A digitally controller lubrication unit is provided to provide consistent oil protection to the feed chain and guide rails. If the oil level drops below a safe level a warning lamp will light up and the feed chain will stop automatically.
- Equipped with an electronic amperage display which is tied in to an overload protection where if the saw motor exceeds a rated amperage the feed chain slows down automatically. This prevents the potential damaged to the saw arbor and/or blades and also prolongs blade life up to 20%.
- Variable feed speed adjustment by frequency inverter from the front of the machine.
- Max. cutting thickness, 6.9”
- Max. cutting width, 13-3/4”
- Fixed inside blade to column, 14.9”
- Min. working length, 27-1/2”
- Max. saw blade diameter, 14” to 18”
- Sawblade bore, 70 mm or 90mm – double keyed
- Saw arbor diameter, 70 mm without sleeve - 90mm with sleeve
- Saw arbor speed, 2500 RPM
- Saw arbor motor, 125 HP (150 HP optional)
- Saw arbor elevation motor, 1/2 HP
- Feed motor, 3 HP (5HP optional)
- Variable feed speed, 8 – 80 FPM (higher speed optional)
- Powered raise & lower of rolls, 1/2 HP
- Dust hood dia., 8”
- Table height (pass line), 29.3”
- Electrics – to UL/CSA standards 230/460 or 575-volt, 3-phase, 60-cycle
- Table area (L x W), 72.4” x 31.1”
- Overall dimensions (L x W x H), 95.5” x 90.5” x 63”, Net weight 6,600 lbs.
- OPTIONAL EQUIPMENT:
- 150 HP Main Motor in lieu of 125 HP
- 90mm OD Saw Sleeve for above Saw
- Laser Light, 20mw with Mounting Bracket
- Saw Blade dia. 16” + 6 Wiper for ripping 6" (155mm)6 high
- Saw Blade dia. 18” + 6 Wiper for ripping 6-3/4" (170mm high)
- Sleeve Support Unit for Unloading/Loading Sleeve & Blades