Description:
(view full)
CAM-WOOD HSTC-62 HIGH SPEED LONG BOARD VERTICAL FINGER JOINTER with the following Specifications:
HSTC-62A Infeed Belt Conveyor:
- Working dimension: 24” wide x 16’ long
- Speed at 110 FPM
- One 3 HP Inverter Drive Motor
SHAPER #1: DFSR-62I - Left Side Heavy Duty Finger Joint Shaper
- Working dimension: 24” wide x 1” to 10” high x 8” to 16' long
- Scoring Saw: 2 HP motor
- Scoring Saw Blade: 7” diameter x 50 tooth
- Scoring Saw speed: 2,850 RPM
- Trim Saw Spindle: 15 HP motor
- Trim Saw Blade: 12” diameter x 80 tooth
- Trim Saw Speed: 2,800 RPM
- (2) Finger Joint Spindles, (1) for rough cut and (1) for finish cut, each with a 30 HP motor
- Spindle diameter: 50 mm
- Diameter of cutterhead possible without knives: 8-1/4”
- Shaper Spindle speed: 3,800 RPM
- Conveyor belt with 3 HP Inverter Drive
- Table cycle by 3 HP Drive Motor
- Table cycle speed from (1) to (4) cycles per minute (depends on work)
HSTC-62A HEAVY SINGLE TABLE OUTFEED TRANSFER CONVEYOR
- Working dimension: 24” wide X 16’ long
- Speed at 110 FPM
- One 3 HP Inverter Drive
HSTC-62A SINGLE TABLE INFEED TRANSFER CONVEYOR
- Working dimension: 24” wide X 16' long
- Speed at 110 FPM
- One 3 HP Inverter Drive
SHAPER #2: DFSR-62I - RIGHT SIDE HEAVY DUTY FINGER JOINT SHAPER WITH GLUE APPLICATOR
- Working dimension: 24” wide x 1” to 10” high x 8” to 16' long
- Scoring Saw: 2 HP motor
- Scoring Saw Blade: 7” diameter x 50 tooth
- Scoring Saw speed: 2,850 RPM
- Trim Saw Spindle: 15 HP motor
- Trim Saw Blade: 12” diameter x 80 tooth
- Trim Saw Speed: 2,800 RPM
- (2) Finger Joint Spindles, (1) for rough cut and (1) for finish cut, each with a 30 HP motor
- Spindle diameter: 50 mm
- Diameter of cutterhead possible without knives: 8-1/4”
- Shaper Spindle speed: 3,800 RPM
- Conveyor belt with 3 HP Inverter Drive
- Table cycle by 3 HP Drive Motor
- Injection type adhesive spreader with standard glue height of 10”
- Glue system included is for PVAC.
- Optional APQUIP Glue System available at extra cost
- Optional Glue Equipment available for Loctite HB X Glue at extra price
- Deduct ...$5,200 if provided without a Glue System
HSTC-62B OUTFEED CONVEYOR WITH BELT CLEANER
- Working dimension 24” long X 16’ wide
- Speed at 115 FPM
- (1) 3 HP Inverter Drive
- (1) 1/2 HP motor for conveyor cleaning device
HSCB-62 TIPPING CONVEYOR W/NARROW CONVEYOR
- Flips boards from vertical to horizontal for automatic feed to the Press
- Working dimensions:
- (1) Conveyor at 24” wide x 16’ long
- (1) Conveyor at 8” wide x 16’ long
- Speed 110 FPM
- 3 HP Inverter Drive
UFJ-600 FINGER JOINT CONTINOUS ASSEMBLY MACHINE FOR INFINITE LENGTHS
- Working dimension 1-3/8” to 10’ wide X 1” to 4” thick by unlimited lengths
- In-feed speed from 100 to 165 FPM
- Cut-Off Saw: 7-1/2 HP
- Cut-Off Saw Speed: 2,850 RPM
- Cut-Off Saw blade dimensions: 18” diameter x 1” bore x 120 tooth carbide tipped
- Hydraulic Power Units: (1) @ 10HP and (1) @ 15HP
- Hydraulic Oil Tank: 50 Gallons
- Out-feed table: 78” Length
NOTE: (5) Days start-up and training by factory technicians included in price.
OPTIONAL ACCESSORIES:
- (4) 40 HP Shaper Motors, add ...$35,000
- (4) 50 HP Inverter Driven Shaper Motors, add ...$40,000
- Overhead lifting system for removing and installing cutterheads, add ...$10,800
- Safety Fencing and electric interlocks, add ...$8,760
- CE electric components, add ...$13,920
- Motor Control Center with under-voltage and overload protection; includes UL and CSA approved electrical components. Electric parts only, not the complete machine.
LUMBER AND ADHESIVE SPECIFICATIONS
- Incoming working lengths from 10” to 16’
- Boards must be at least 50% longer than their width
- Lumber thickness from 1” to 4”
- Lumber width from 1-3/8” to 10”
- Assembled out-feed lengths are unlimited
- Glue type to be used: PVAC.
- Lumber species are soft and hardwoods
- 8% to 12% Moisture content
- Incoming boards to be planed (S4S)
PRODUCTION CALCUATED ON A 480-MINUTE SHIFT
- Finger length according to buyer's specs up to 1-1/8" long
- 6’ Average in-feed length
- 2” x 4”, 6”, 8” or 10" incoming boards
- Shapers tables are capable of cycling up to 4-times per minute
- Maximum of (16) 1-1/2” thick boards per shaper table when making vertical joints
- Maximum of (3) 8” wide boards per shaper table when making horizontal joints
- Lengths of assembled boards are unlimited on the Continuous Assembly Machine
- Following production rates are calculated with an 80% utilization factor
NOTE: Table cycle speed varies with working height, width, and weight of the boards
PROCUCTION RATES when vertical finger jointing (joints seen in the face of the board):
- (1) Cycle per minute x (16) 1-1/2" thick x 4, 6, or 8” boards per table x 6’ average block length x 480
Minute shift x 0.8 rate of utilization = 36,864 lineal per shift
- (3) Cycles per minute x (16) 1-1/2” thick x 4, 6, or 8” boards per table x 6’ average block length x 480
Minute shift x 0.8 rate of utilization = 110,592 lineal per shift
PROCUCTION RATE when horizontal finger jointing (joints seen in the edge of the board): - (3) Cycles per minute x (3) 8” wide boards per table x 6’ average infeed length x 480"
Minute shift x 0.8 rate of utilization = 6,912 lineal per shift
TO BE PROVIDED BY CUSTOMER
- Electric power supply to Motor Control Center
- Constant voltage (5% max. voltage deviation)
- Temperature range for computer control not to exceeded 95° Fahrenheit
- 65% Maximum relative humidity for computer control system
- Dust exhaust system
- Compressed
- Hydraulic oil
- Motor Control Center with under-voltage and overload protection; includes UL and CSA approved electrical components Electric parts only, not the complete machine.
- Dust collection outlets: (6) at 8” dia. and (1) at 4”
- Compressed air supply: Minimum 30 HP @ 120 PSI with a 150 gallon air receiver
|