VACUUM PUMP (LIQUID RING)
|Year of Mfg.:||2003|
|Condition:||Very good condition|
|Elect./Voltage:||230/460 V, 60 Cy, 3 Ph.|
|Value New:||$ 28,000|
|Price:||$ 8,900 USD||(Convert)|
|Financing:||$ 181 National Capital Leasing|
|Region:||MIDWEST (Click for Regional Map)|
TRAVAINI TRO 500S-1A 40 HP liquid ring vacuum pump 28,701 Hours:
Nominal capacity 500 ACFM @ 20" HgV; max Vacuum 27" HgV.
Pump materials include cast iron housing, ductile iron impeller and stain-less steel shaft. Shaft seals are carbon face with Viton elastomers.
40 HP, 230/460 Volt, 3-Phase, 60 Hz, TEFC monoblock assembly for direct drive, no field alignment needed.
Sealing fluid re-circulating system includes reservoir of carbon steel with fluid level gauge and drain, a high-efficiency discharge separator, and oversized heat exchanger.
High temp switch to protect against over temp operation.- Complete with a charge of Dynalube fluid.
Suction line accessories include an inlet check valve, vacuum gauge (0 - 30" HgV), inlet filter assembly, manual unloader valve, and vacuum relief valve.
Heat exchanger is an air cooler type made from aluminum and extended surface fins.
Electrical controls include: Starter/overload reset, pump running light, hour meter, hi-temp light, and terminal blocks, all mounted in a NEMA 12 cabinet.
The amps @ 230 Volt = 104; the amps @ 460 Volt = 52 amps.
|Special Note:||UNDER CONTRACT|
|Comment:||TRAVAINI TRO 500S-1A 40 HP liquid ring vacuum pump 28,701 Hours!|
|Written By:||Original Seller|
|*Dimensions:||84" L x 35" W x 70" H|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.