; Used EZ SANDER EZ-3760 WIDE BELT SANDER
You are not logged in   Login  |  Register  |  Help
 

Additional Photos (Click to view Larger)

For Immediate Answers Contact:

Ed Webb
(800) 374-5009 ext. 377
Intl. +1 (704) 841-2001
Ed.Webb@exfactory.com

If not available, try his/her backup:
Joe Retzlaff ext.348
joe.retzlaff@exfactory.com
EXF #:   SW-011885  
Brand/Model:  

EZ SANDER EZ-3760
Machine Type:  

WIDE BELT SANDER
Year of Mfg.:   N/A
Condition:   Demonstrator w/Warranty   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New:   $ 13,995
Price:   $ 10,795 USD    
Financing: $ 220 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)

Description:

EZ SANDER EZ-3760 Wide Belt Sander for woodworking with Combination Head

EZ-Sander's are built to with the ability to hold very tight tolerance (+/-.003) side to side when set up properly.

Specifications:

  The sanding head is a combination head which consists of a 5" rubber covered contact drum for being aggressive followed by an adjustable 2-1/2" graphite covered felt polishing platen for doing very fine finishing sanding using a 37" X 60" abrasive belt.

  The conveyor belt speed is set to run at 10 - 30 FPM and is controlled via AC variable speed unit mounted in the main control panel. Simply adjust the dial setting your desired feed speed.

  Double infeed and outfeed holddown rolls are provided to help ensure proper part feeding through the Sander.

  The conveyor table/bed opening has a 0" to 5" opening allowing the operator to sand some parts as thick as 5" and have the ability to sand very thin parts as well.

  Power raising and lowering of the conveyor bed is standard.

  Digital thickness display is standard.

Complete with & Features:

  EZ Sander is equipped with a state of the art electronic tracking system for the abrasive belt.

  Emergency stop heavy duty caliper disc brakes bring the sanding head to a stop within 4 to 5 Sec when activated by the machine's safety interlock system.

  Limit Switches on both sides of the abrasive belt to keep the belt from tover travel. 

NOTE:

  Available in single phase with a 7.5 HP or 10 HP motor.

  Voltage change to 440 Volt ...$275.
    Special Note: Bargain
    Comment: APEX EZ-SANDER Demonstration Model. Like new but a few scratches and dents.
    Written By: Ed Webb  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.