HOME > SAWS - OPTIMIZING/DEFECT > SO-280265 > RETURN

DIMTER S 90 SPEED OPTIMIZING CUT-OFF SAW



For Immediate Help Contact:
Jim Reedy
(800) 374-5009 ext. 455
Intl. +1 (704) 841-2001
jim.reedy@exfactory.com
If not available, try his/her backup:
Jeff Terrill ext.349
jeff.terrill@exfactory.com
Brand:  

DIMTER

Model:   S 90 SPEED
Machine Type:  

OPTIMIZING CUT-OFF SAW

Year of Mfg.:   2005
Condition:   Good condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New:   $ 150,000
Price:   $ 30,000 USD     (Convert)
Financing: $ 610 National Capital Leasing
Region:   PACIFIC NORTHWEST (Click for Regional Map)
EXF #:   SO-280265  
Description:   (view full)

DIMTER S 90 Speed Optimizing Cut off Saw

Working dimensions:

  4" Thick x 9" wide max. incoming board cap.; min. cap. 3/4" x 1" wide.

  Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left), 16" min. to 18'-6' max. infeed board lengths, 3" min. to 18'-6" max. outfeed lengths.

  Equipped with:

  10 HP Arbor motor driving 20-1/2" dia. blade with 30 mm bore at 2,900 RPM.

  Infeed system with: Precision, Servo controlled pusher bar motor, 295 FPM max., travels full length of board, reading crayon marks for cut to length, optimization & defecting marks.

  Pusher arm automatically positions itself after measuring the board and precisely feeds the board into the saw with positioning accuracy of +/- 0.004".

  Waste gate for discharge of waste items from saw cuts.

  Marking Station: Attached to the transport section; accepts incoming lengths up to 18'-6".

  Saw uses (2) pneumatically operated side hold-over rolls before-and-after the saw blade.

  Computer controlled holddown shoe ensures stock is securely held in position during cut; holddown, hold-over devices, and precision Servo controlled pusher arm provide square, accurate, and high-quality cuts - even on large cross-sections.

  Complete with:

  Programmable controls for cutlists, optimizing for yield and defecting capability.

  Out feed sortline with 2 HP motor driving a 10" wide x 33' long belt with (5) pneumatically controlled mechanical ejectors; encoder permits accurate sorts according to width, length or grade.

  End of belt can also be used in an additional sort for long fixed length parts, finger joint blocks, or long waste.

  Recently tuned up by Dimter technician.
 

    Special Note: SOLD
    Comment: Recently tuned up by Dimter Technician;...see video, still under power!
    Written By: Original Seller  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.