Description:
(view full)
ZMD INTERNATIONAL "3D 759SS" 3D Thermofoiler with Automated Single-Shuttle Table.
For Kitchen Cabinets, RTA Furniture, Store Fixtures, Component & Sign Industries. Even heat distribution and vacuum are key design parameters which fill the need of a less expensive Laminating System, yet producing repeatable parts.
Precise control of the parameters eliminates hot/cold spots, prevents wrinkling and ensures adhesive activation during pressing cycles.
Overall Data: Appprox. heating bank size 5' x 9', Shuttle table is 58" x 108" with usable area of 50" x 108".
Heat Zones: (15) Electronically separated, individually controlled heating zones with 1 - 100% Zone setting, 15 W/Sq. In. Ceramic infrared radiant heat panels for very even heat. Heaters over-extend the platen by 12" ensuring heat distribution to the outer edges. Non-contact temperature reading over plastic sheet during heating cycle. Pyrometer measures IR radiant heat temp
Controls: Microprocessor control with fully-integrated ATU (Access Timer Unit), From a keypad operator can and adjust: Preheat Timer; Heat/Soak Time; Vacuum Delay; Cooling System.Temperature-triggered vacuum cycle. Unlimited recipe storage.
Comes with: BUSCH "RA0063.E5Z3.1003" 41 CFM Vacuum producer. 3 HP oil-filled deep Vacuum Pump capable of producing the full 29.7 in-hg vacuum level (perfect vacuum is 29.9 in hg). This level results in (1) ton of pressure per sq. ft. Many laminating materials require pressure even during the cooling cycle to allow adhesion time to avoid spring back.
Includes: Pressing station end-mounted PVC roll holder with (2) Full size roll capacity & Static electricity elimination bar.
Construction: Industrial-grade silicone frame seals. Seals can easily removed for mounting a membrane. Shuttle table servo motor, (2) 24” Top-mounted cooling fans. High-grade aluminum pressure frame High-grade aluminum pressure frame.
Machine is de-installed and ready to be loaded.
NOTE: Seller states that machine has approximately 500 Hrs.,
|