For Immediate Help Contact:
Tony Cornacchione
(800) 374-5009 ext. 432
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Dan Wolters ext.376


Model:   REFIL 2510
Machine Type:  


Year of Mfg.:   2002
Condition:   Good Condition   
Elect./Voltage:   380/400 V, 50/60 Hz, 3 Ph.
Value New:   $ 95,000
Price:   Please call     (Convert)
Region:   SOUTH (Click for Regional Map)
EXF #:   PM-010454  
Description:   (view full)

ESSETRE REFIL 2510 CNC PVC Foil & Laminate Trimmer.

CNC 3-Axes (3 controlled axes) Trimming Machine for foil laminated 3D furniture components removing the entire overlapping PVC foil from the membrane pressed part. Overhead bridge CNC controlled trimmer cutterhead. Built to handle continuous production.


  Automatically recognizes the size and thickness of the part being trimmed and with this feature you can randomly feed parts of different size and thickness.

  Rectangular parts are measured by light sensors and pusher and will then be processed. The maximum processing speed varies, depending on the quality of the edge bonding directly after the pressing cycle. 


  Average production speed is 5 - 7 parts/min. Max belt speed is 60/MPM (198 FPM). Max cutting speed is 70 - 80 MPM (230 - 260 FPM).


  Trimming is processed in a through-feed operation by transporting the panel via a friction belt (requires no hold down of parts) below the tool bridge   Knife head rotates up to 360 °.  Panels are advanced by the belt up to a reference point and stops, where the cutting head awaits. The leading edge is cut across the belt direction first. The head rotates 90° as the belt advances to cut the longitudinal sides.Head rotates again to cut the trailing edge. Panel exits and procedure is repeated with a new panel.


  Table size 39" x 145" (1000 x 3700 mm). Pass line height is 35.5". Max part cut size is 35.4" x 86.6"  (900 x 2200 mm). Axes stroke is   39.3" x 98.4" (1000 x 2500 mm). Min. part size is 5.9" x 11.8" (150 x 300 mm). Max. to min. thickness  0.98" - 0.393"  (25 - 10 mm). Machine weight approx. 4460 Lbs.

Comes with: 

  WYRKS powered infeed roller conveyor table with 1/4 HP DC drive. Lineshaft (with individual round rubber belt to each roller). Table rollers canted toward left hand infeed fence. Floor standing control panel houses NC control and operator display.

    Special Note:
    Comment: Reduces your manual trimming labor significantly.
    Written By: Tony Cornacchione  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.