CNC LATHE/MACHINING CENTER
|Year of Mfg.:||2009|
|Condition:||Very good condition|
|Elect./Voltage:||400 V, 50/60 Cy, 3 Ph.|
|Value New:||$ 550,000|
|Region:||EASTERN CDN (Click for Regional Map)|
INTOREX TMK-5000 ...(8) Axes CNC Lathe/Machining Center with ATC.
The ultimate combination of Lathe//CNC Machining Center that can machine any turning, symmetrical or asymmetrical as well as any component that a CNC router can do...all in one machine.
Special CNC machining center to turn, sand and mill wooden columns for log houses, architectural posts, etc.. Constructed with a heavy-duty cast iron frame which guarantees a stable solid base, and assures high precision and quality finishing.
Length capacity is about 5,000 mm (16'- 4"). Diameter Capacity: TBA.
(8) CNC axes with simultaneous interpolation on (5) axes.
X-axis controls the position of the saddle/carriage; 'Z & X' control the position of the router spindle;
A-axis CNC controls the headstock rotation;
'B' is the water-cooled CNC Router Spindle with variable speed of 0 - 24, 000 RPM;
'Y2' Circular saw for hogging/turning; 'Y3' Shaping unit with milling cutter block 124 mm dia. x 390 mm long (4.9" dia. by 15.3" long);
'Y4' axis combination shaped turning or narrow belt sander.
Also equipped with:
(2) End boring units to pre-drill holes at ends of turnings. These holes are for supporting the headstock and tailstock for rotation of the turning component.
(1) Hydraulic unit for automatic centering of the component between headstock and tailstock.
Note: Versatility of CNC Router and Lathe in one single machine.
|Special Note:||Rare Find|
|Comment:||One of the largest CNC lathes that INTOREX has ever made!|
|Written By:||Tony Cornacchione|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.