ROTARY TURNING LATHE
|Year of Mfg.:||1995|
|Elect./Voltage:||230 V, 60 Cy, 3 Ph.|
|Value New:||$ 65,000|
|Price:||$ 11,200 USD||(Convert)|
|Financing:||$ 228 National Capital Leasing|
|Region:||MTN/CENTRAL CDN (Click for Regional Map)|
MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe with Hopper Feed.
Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size.
Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control..
Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut
Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings.
Total electrical load 26.5 HP.
Rotary knife heads available at extra cost.
|Comment:||A workhorse that will outlive all the others.|
|Written By:||Tony Cornacchione|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.