HOME > FINGER JOINTERS > FJ-010642 > RETURN

USED NELSON & ATKINSON FJ-728 FINGER JOINTER (LOW PRODUCTION)



For Immediate Help Contact:
Jeff Terrill
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com
If not available, try his/her backup:
Dan Wolters ext.376
dan.wolters@exfactory.com
Brand:  

NELSON & ATKINSON

Model:   FJ-728
Machine Type:  

FINGER JOINTER (LOW PRODUCTION)

Year of Mfg.:   1989
Condition:   Good Condition   
Elect./Voltage:   600 V, 60 Cy, 3 Ph.
Value New:   $ 50,000
Price:   $ 10,900 USD     (Convert)
Financing: $ 222 National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)
EXF #:   FJ-010642  
Description:   (view full)

NELSON ATKINSON FJ-728 Low Production Finger Jointer

Complete with self-feeding table with holddown clamps, hydraulically stroked past trim saw and cutterhead.

Specifications:

  Trimsaw powered by 3 HP direct drive, 3,600 RPM arbor motor; uses 8" dia. blade.

  Shaper with 7-1/2 HP spindle motor, 1-1/4" spindle, 7" vertical spindle travel, 6-3/4" cap. under nut. - (4) spindle speed settings of 3,500 - 6,500 - 8,000 & 10,000 RPM, reverse rotation switch, 45" x 35" table, 12-1/2" max. tooling dia.; 36" table height.

  Includes cutter guard, dust outlets, self-braking motor, spindle lock, emergency stop and motor control center for all motor and electrical functions.

  Finger Joint Assembly Machine complete with material clamps and squeeze press. Assembles a pair of joints per cycle; operator "steps" the assembled length past the automatic cutoff saw.

When a length stop is contacted by the assembled length, the cutoff saw fires, cutting up from under the table, and the finger jointed board is cut to its specified lengths. Long lengths can be assembled by relocating the length stop.

  Tooling: (1) Milled to pattern cutterhead and (1) each carbide tipped Retrim and Cutoff Sawblades.

    Special Note: Rare Find
    Comment: Hard to find these little Finger Jointers! - Consider offer!
    Written By: Jeff Terrill  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.