DRILL (DEEP HOLE GUN)
|Year of Mfg.:||2017|
|Value New:||$ 550,000|
|Region:||MIDWEST (Click for Regional Map)|
TARUS TPTCGD508SB CNC Gun Drill
Table Dimensions: 60" x 96"
Table Capacity: 60,000 lbs
- Max Gun Drilling (No Pilot): 2"
- BTA/STS Drilling Diameter (No Pilot): 7.5"
- BTS/STS with Pilot Hole: 2.22"
Drilling Feed Force: 7,723 lbs
Drill Depth (3 Whip Guides): 87.45"
Drill Slide Travel (No Whip Guides): 93.45"
Drill Stroke (W-Axis), No Whip Guides: 93"
Drill Stroke with (3) Whip Guides: 81.4"
- X-Axis (Cross Table): 114"
- Y-Axis (Vertical): 60"
- Z-Axis (Spindle): 46"
T-Slots in Main Table (with Gutter for Draining): 7/8"
- Spindle Power (40% Duty Cycle S6): 33.25 HP
- Spindle Power (100% Duty Cycle 51): 22.79 HP
- Spindle Speed Range: 0 - 3,394 RPM
- Spindle Maximum Torque: 0 - 272 ft-lbs
- Spindle Power (40% Duty Cycle): 33.25 HP
- Power: 22.7 HP
- Speed Range: 0 - 3500 RPM
- Max Torque: 13 ft-lbs
- Stroke (In & Out): 10"
- ANSI B 5.50 - 78, ISO 7388 12:
- Tool Type: B
- Taper: CAT 50
- Coolant Pressure (Maximum): 1,500 PSI
- Coolant Pressure Pump Power: 20 HP each
- Two (2) Pumps Total - Data for a Single Pump): 0 - 40 G.P.M.
- Coolant Volume (Servo Controlled): 0 - 40 GPM
- Coolant Reservoir (Clean Tank): 700 Gallons
- Coolant Reservoir (Discharge Tank): 250 Gallons
- Coolant Recirculation Pump 5 HB: 75 GPM
- Large Dual Inline Bag Filters
- 25 Micron then 19 Micron Filtration System
Auxiliary Spindle for Milling, Thread Milling, Tapping, Counter Boring and Spot Facing
BTS / STS Drills Capable of 2.5" Diameter Drilling
Unit Under Power
Dual Spindles are Side By Side, Spaced 12.5" Center to Center
Reducing Effective Travel to 101.5" (2,578 mm)
EX-FACTORY provides the metal forming and fabrication industry turn-Key services for “piece-of-mind” in new and used machinery purchases. From sourcing and helping customers with their machinery questions and needs, logistics and transportation services, to financing and installation resources, EX-FACTORY is your premier machinery provider. Horizontal boring mills, plate rolls, gun drills, and screw machines are just a few categories in the over 6,000 machines listed at EXFACTORY.com.
|Comment:||A Machine like this doesn't come on the market often!|
|Written By:||Marvin Spehar|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.