You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals.
We are awaiting literature from the principals.

For Immediate Answers Contact:
Norm Schust
(800) 374-5009 ext.  445
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Bob Bullin ext 346

EXF #:   FT-010668  


Machine Type:  


Year of Mfg.:   2005
Condition:   Good Condition   
Elect./Voltage:   380/400 V, 50/60 Hz, 3 Ph.
Value New: $ 265,000  
Price: Please Call    Act Now!
Financing:   National Capital Leasing
Region:   NORTHEAST (Click for Regional Map)


SCMI CELLA NESTING FLAT TABLE MACHINE (W/LOADING, UNLOADING): Machine must be removed  between Oct.14 - Oct. 18, 2019 

  •  Specifications: 
    5' x 12' Traveling "Bridge Gantry", stationary aluminum grid "MATRIX" table with square grid pattern for fixturing parts; (8) vacuum zones controlled by electronic switches.

    Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoilboards for "nested base machining".

    Part location pop-up pins mounted on the table perimeter.
  • Working Field:
    "X" Axis is 114.1" (3,686 mm); "Y" axis is 61.2" (1,555 mm); "Z" axis stroke is 9.4" (240 mm); max. material thickness 5.9" (150 mm) (5.1" / 1300 mm when using off-loading system) .
  • Positioning Speed:
    "X" & "Y" Axis 229 FPM (70 MPM), "Z" axis at 82 FPM (26 MPM); closed loop AC Servo drive system.

    High precision "Rack & Pinion" system in "X" & "Y" axis & ground ball screws "Z" axis; all axes ride on extra large precision profile linear guideways.
  • Boring unit:
    3 HP (2.2 kW) - 6,000 RPM motor; (12) independent vertical spindles on 32 mm centers, (7) spindles in "X" axis & (5) spindles in "Y" axis.
  • Machining:
    (1) 16.5 HP (12.3 kW) Air cooled electro spindle with HSK F63 adaptor; variable spindle speeds from 1,500 - 24,000 RPM;

    (1) 20-Position ATC tool rack mounted at the rear of the machine base.
  • Operator & Machine Control:
    PC Front-End with: "XILOG Plus" + Windows "XP PRO" operating system; 17" high resolution LCD flat-screen; ergonomic keypad; CD ROM & 1.44 MB disk drives.

    USB Ports, serial ports RS-232 & RS-242 & Ethernet adaptor; programs can be transferred via disk or downloading by wire is possible; all computer components are mounted on a mobile stand.

    "XILOG Plus" offers incredible list of functions from (a) auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria.

    Additionally equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes.

    Onboard cycle optimization, onboard calculator, mirror-imaging, and repeat imaging.
  • Complete with:
    (2) 300 m³/Hr Vacuum Pump; automatic lube system; 208/230/460 auto-transformer; safety enclosure around the spindle carriage; photo-cell safety sensors & perimiter fencing; documents & manuals.

  • (1) Automatic Lifting Table Mounted on the RH side for "CELLA NESTING". - Panel stack specifications: Max. panel stack height is 600 mm (23.62"), max. panel stack weight is 4,000 kG (8,800 Lbs), max. panel stack misalignment for "X" axis is 30 mm (1.18") & "Y" axis is 5 mm (0.19").

    It is possible to lift the panel stack up to the machine worktable height, allowing the suction cups to grip the top panel.
  • (1) Workpiece Loading Unit Mounted on the RH side with (3) Suction Cups for "CELLA NESTING": - Vacuum device mounted on the machine upright with suction cups able to grip the upper panel of the stack on the machine right side and move it up to the machine table support stops.

    Max. weight of single workpiece to be loaded is 200 kG (440 Lbs), max. panel thickness is 30 mm (1.18"), min. panel thickness is 10 mm (0.39"), min. workpiece to be loaded 900 x 1,600 mm (35" x 62.9").

    This device includes a detecting system positioned on the machine table left end for a correct panel positioning during loading operation.
  • (1) Workpiece Outfeed Pusher Mounted on the LH side for "CELLA NESTING": - Device is mounted on the machine upright that moves the workpieces towards the unloading area on the machine left side; this device cleans the spoil board while it unloads the components.

    The Conveyor is equipped with automatic valves, which are opened during the cleaning operation; cleaning exhaust outlet diameter of 300 mm (11.81"), exhaust air speed 30 MPS, exhaust air consumption 7,600 cbm/Hr.
  • (1) Outfeed Conveyor Belt Mounted on the LH side for "CELLA NESTING": - Powered belt capable of moving components from the machine table to the unloading position.

    This position is equipped with a photo-cell automatic detecting system for the belt start/stop & push-button for belt manual positioning. 
  • Actual Model is SCMI CELLA NESTING.
  • NOTE: Machine must be removed  between Oct.14 - Oct. 18 but not before Oct.14 & not after Oct.18!
Questions? For Instant Communication, Click Here
Special Note: Make Offer
Comment: Motivated seller will consider "ALL" reasonable offers - see NOTE!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions