You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals.
Click here to view all literature

For Immediate Answers Contact:
Louis Sicotte
(800) 374-5009 ext.  329
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Joe Retzlaff ext 348

EXF #:   AP-010403  


Machine Type:  


Year of Mfg.:   2007
Condition:   Good Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 165,000  
Price: $   38,500    Act Now!
Financing:   $ 783 National Capital Leasing
Region:   PACIFIC NORTHWEST (Click for Regional Map)


BIESSE REGAL 330 -1350 RRK Planer/Sander, (3) Heads;

  • 53" Width cap., Planer Knife, Drum, and Combination Head. 

    Head Configuration:
  • 1st Head: (8) Helical Spirals with 4-sided inset knives (520 inserts); 180 mm dia. cutting, 30 HP Y-Delta soft start motor.
  • 2nd Head: Helical Grooved 85 Shore rubber coated roller, 250 mm dia, for calibration, 25 HP Y-Delta soft start motor.
  • 3rd Head: Combination Head  - 45 Shore Drum / Pneumatic Sectional Pad; 175 mm Dia., 45 Shore Drum, 20 HP Y-Delta soft start motor. 

  • Base: monocoque shell type, nut and bolt free, constructed in thick steel tube, electro-welded using robot technology to guarantee maximum rigidity and precision.
  • Worktable vertical movement: By means of (4) heavy duties trapezoidal screws anchored externally to the base, supported by thrust bearings and coupled by means of stiffener bars to guarantee perfect alignment and stability.
  • Electronic display of workpiece thickness
  • Support rollers: Four at the infeed and four at the outfeed end of the feed belt.
  • Rubber coated pressure rollers located before and after the operating units.
  • Electronic sanding belt tracking system.
  • Feed belt in 60 Shore rubber.
  • Automatic Star-Delta starter on main motors.
  • Automatic brake for each operating unit.
  • Automatic feed belt tracking
  • Easy-Quick for abrasive grain size selection.
  • Over-thickness micro control system.
  • First pressure roller equipped with anti kick-back system. 

  • Working width 1,350 mm (53"). 
  • Sanding belt dimensions 1,370 x 2,620 (54" x 103").
  • Min. and max. workable thicknesses: 3 - 200 mm (3/16" - 7-3/4").
  •  Feed belt speed 3 - 20 MPM (10 - 65 FPM).
  • Working pressure 6 Bar. 

    Equipped with & Features:
  • Abrasive Belt Blowers with timer 2nd and 3rd working unit.
  • Tampico Cleaning Brush, 200 mm dia. (7-3/4"),  3 HP motor. 
  • Pressing Shoes before/after each working unit. 
  • Pneumatic on/off selection of working units from control panel.
  • 4 HP Inverter for Feed Drive 3 - 20 MPM (10 - 65 FPM).
  • Rubber Coated Rear Drive Roller for Conveyor.
  • Constant Pass-line Height of Work Table; Fixed Table 900 mm. 
  • Vacuum Table with 7.5 HP fan motor and proportional valve.
  • Four Roller Infeed and Four Roller Outfeed Table.
  • "Easy Pro 2000" touch screen Controller.
Questions? For Instant Communication, Click Here
Special Note: S O L D
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Louis Sicotte
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions