BIESSE ARTECH LEVIA 330 Wide Belt Sander, (3) Heads
43" Width cap. Drum, Drum, Combination Head
Head Configuration;&nbs...
Read More
Comment: Very nice looking sander, do not hesitate
Year of Mfg: 2005
Cond: Cleaned and checked
|
|
BIESSE Artech Levia 400 Veneer Sander - Three-Head, 1,350 mm (53") working width.
Veneer sander with (1) ...
Read More
Comment: This is truly a rare find, perfect veneer sander!
Year of Mfg: 2011
Cond: Excellent condition
|
|
BOARKE (Holz-Her) BKM-37RK 2-Head Wide Belt Sander
37" Width cap. Drum and Combination Head
Head Configuration:&nb...
Read More
Comment: Great sander for a smaller type shop, and it's well priced!
Year of Mfg: 2014
Cond: Very good condition
|
|
BUTFERING CLASSIC 213 Wide Belt Sander (2) Heads.
52" Width cap. Platen, Platen, Ideal thin veneer and lacquer sander...
Read More
Comment: It's a Butfering, you can't go wrong
Year of Mfg:
Cond: Good Condition
|
|
BÜTFERING - DIAMOND SCO 213 QC, ...2-Head Wide Belt Sander
53" Width cap. Crossbelt, Combination Head
Head Co...
Read More
Comment: This is a nice sander and it is a BUTFERING
Year of Mfg: 2005
Cond: Cleaned and checked
|
|
BUTFERING OPTIMAT SCO 413 RRRR Top Head Wide Belt Sander (...part of line with SX-012681 Profiline 3-Head Bottom Sander)
Top 4-...
Read More
Comment: Well maintained 4-Head, part of T & B Sanding Line!
Year of Mfg: 2007
Cond: Very good condition
|
|
BUTFERING STO 211 RL Wide Belt Sander (2) Heads
43" width cap Drum, Combination Head
Head Configuration:
1st Head: Groove...
Read More
Comment: Reconditioned, ready to go!
Year of Mfg: 2006
Cond: Reconditioned
|
|
BUTFERING OPTIMAT STO 311 RRL Wide Belt Sander, (3) Heads
43" Width cap., Drum, Drum, Platen
Head Configuration
...
Read More
Comment: Nice looking sander and it's a Butfering!
Year of Mfg: 2003
Cond: Cleaned and checked
|
|
BUTFERING - Profiline, ...SUR 313 RRR Bottom Wide Belt Sander with Powered Infeed & Connect to Top Sander (...see SX-01...
Read More
Comment: Bottom 3-Head w/ Powered infeed and Tie-in Conveyor!
Year of Mfg: 2007
Cond: Very good condition
|
|
BÜTFERING SWT 525 QC DIAMOND --- 2-Head Wide Belt Sander for Lacquer & Veneer Sanding.
1,350 mm (53") wor...
Read More
Comment: Less then 1,400 Hours a rare find
Year of Mfg: 2009
Cond: Very good condition
|
|
Butfering Vega 313 Wide Belt Sander 3 Heads
53" Width cap. Drum, Combination Head, Segmented polishing platen
Head Configura...
Read More
Comment: This is a well priced Butfering
Year of Mfg: 2002
Cond: Good Condition
|
|
Cam-Wood WS-DA2560 Wide Belt Sander (2) Heads
With the two-head wide belt sander, you can accurately, heavily sand your stock w...
Read More
Comment: Well priced for all these features
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
Cam-Wood WS-DA3760 Wide Belt Sander, (2) Heads
With the two-head wide belt sander, you can accurately, heavily sand your stock ...
Read More
Comment: Very well priced especially with all these features!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
CEMCO 4000, Wide Belt Sander, (2) Heads
38" Width cap. - Drum, Platen configuration
Head Configuration:
1st Head:&n...
Read More
Comment: This is a true workhorse, do not hesitate to make it yours!
Year of Mfg:
Cond: Very good condition
|
|
CEMCO URF-2243 Wide Belt Sander (2) Heads
43" Width cap. Drum, Platen
Head Configuration
1st Head: Rubber covered co...
Read More
Comment: Heavy Duty Sander, this is a work horse
Year of Mfg:
Cond: Very good condition
|
|
CEMCO URFF-50HD 3-Head "Super Heavy Duty" Wide Belt Sander
Equipped with one 75 HP & two 50 HP motors 1st Head: H...
Read More
Comment: Reliable, "Do-It-All" They don't build them like this anymore...
Year of Mfg: N/A
Cond: Good condition
|
|
COSTA KK CC-CCC 1350 Wide Belt Bottom and Top Sander, (5) Heads;
53" Width capacity, Bottom (2) drums, Top (3) drums....
Read More
Comment: This is a workhorse if you are calibrating
Year of Mfg:
Cond: As Is Condition
|
|
COSTA ACCT1350 Wide Belt Sander (3) Heads
53" Width cap Drum, Drum. platen
Head Configuration:
1st Head: Rubber covered c...
Read More
Comment: This is a workhorse
Year of Mfg: 1998
Cond: Good Condition
|
|
COSTA AKF-CT-1350 Wide Belt (Veneer) Sander, (2) Heads
52" Width cap. Drum, Segmented platen
Head Configuration:
1st...
Read More
Comment: This is a great looking Costa Wide Belt Sander!
Year of Mfg: 2005
Cond: Very good condition
|
|
COSTA KA CCT 1350 3-Head Sander: 52" width capacity
Excellent Veneer and Solid wood sander with (2) Contact rolls and (1) Segme...
Read More
Comment: A really well equipped COSTA "KA CCT" 3+1 Head Wide Belt Sand...
Year of Mfg: 2002
Cond: Very good condition
|
|
Costa Model KBH CCCT 1350 and KH2 CCCT 1350 Top and Bottom Sander Line
Head configuration
Machine #1 is a Model KBH CCCT Fou...
Read More
Comment: This is a rear find
Year of Mfg: 2006
Cond: Reconditioned
|
|
COSTA 1350 Wide Belt Sander, (4) Heads;
Like New and complete with the following major components & features: 1,350 mm (53&rdq...
Read More
Comment: A great machine why pay more and wait for new?
Year of Mfg: 2018
Cond: Like New
|
|
COSTA SA TT 1350 Wide Belt Veneer Sander
2-Head, 53" width cap. - 2 Longitudinal abrasive belts length 2620 mm.
1st Positio...
Read More
Comment: Nicely maintained machine
Year of Mfg: 2003
Cond: Good Condition
|
|
DMC CHRONOSAND CN 110/2 Wide Belt Sander, (2) Heads
43" Width cap. and equipped with Drum and Drum.
Head Conf...
Read More
Comment: Nice PAckage and well priced
Year of Mfg:
Cond: Good Condition
|
|
D M C IS 130 RR BOTTOM Wide Belt Sanding Machine, equipped with (2) bottom sanding contact rollers, & brush roller.
...
Read More
Comment: Can be combined with the COSTA Mod. 80 TR CT into a nice sand...
Year of Mfg: 1995
Cond: Cleaned and checked
|
|
DMC EuroSystem SY-TC 1350 Heavy-Duty 4-Head Wide Belt Sander
53" Width cap. Drum, Drum, Drum, Segmented Platen
Specifi...
Read More
Comment: This is a good buy, rare find!
Year of Mfg: 2012
Cond: Very good condition
|
|
DMC TC1100 1M3, 6-Head Top & Bottom Sander
(3) Heads bottom and (3) heads top, 1100 mm (43") max. width,
Head sequence...
Read More
Comment: Very clean sander - priced at a fraction of new!
Year of Mfg: 2000
Cond: Very good condition
|
|
D M C UNISAND 135 - 3-Head Wide Belt Veneer & Finishing Sander. General Data:
3-Heads, 51" (1300 mm) nominal width cap., motor...
Read More
Comment: Very clean and well maintained sander
Year of Mfg: 1996
Cond: Good Condition
|
|
DMC UNISAND 2000-M2 Wide Belt Sander (2) Heads:
53" Width cap. Drum, Platen
Head Configuration:
1st Head: 11" d...
Read More
Comment: Just came out of production
Year of Mfg: 1999
Cond: Good Condition
|
|
DMC UNISAND K65 ... Wide Belt Calibrating & Finishing Sander Machine Configuration:
65" Wide, 2-Head Wide Belt Sa...
Read More
Comment: This DMC K65 ... 65" Finishing Sander is very hard to find!
Year of Mfg: 2009
Cond: Very good condition
|
|
DMC UNISAND K 1350 M2 1,350 mm (53.15") 3-Head Veneer Sander
For lacquer sanding, veneer cut, light calibration cut.
NOTE: The following specifications need to be confirmed by Seller.
Specifications: Working Thickness 4 - 200 mm (0.16" - 7.87"). 1st Head: TA Cross belt sanding unit, w...
Read More
Year of Mfg: 2007
Cond: Very good condition
|
|
DMC UNISAND K-1350 Wide Belt Sander, (4) Heads
53" Width cap. Drum, Drum, Orbital, Orbital Head
Head Configuratio...
Read More
Comment: This is a rare find and very well priced!
Year of Mfg: 2005
Cond: Very good condition
|
|
EMC - BABY GLOSS ...Polishing Machine for FLAT PANELS
Suitable for high gloss lacquered wood panels, for polyurethane lac...
Read More
Comment: Versatile High Gloss Polishing Machine for the mid-size shop,...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC - EASY GLOSS ... Polishing Machine for FLAT PANELS
Suitable for high gloss lacquered wood panels, for polyurethane la...
Read More
Comment: High Gloss Polishing Machine will take a 4' x 8'!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC EASY GLOSS Polishing Machine for CURVED & FLAT PANELS
Suitable for high gloss lacquered wood panels, for polyure...
Read More
Comment: High Gloss Polishing Machine, for CURVED parts.
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC EXPLORER 1100 2RK CALIBRATING SANDER
43" Width cap, Drum, Combination head
Head Configuration:
1st Head: Contact roll...
Read More
Comment: Quality sander and well priced, do not hesitate!
Year of Mfg:
Cond: Good Condition
|
|
EMC EXPLORER 1100 2RK ... Wide Belt Sander with (2) Sanding Heads; Roller and Combination head roller/pad.
...
Read More
Comment: A basic 2-head sander for under $ 50,000!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC EXPLORER 1100 3RRK ... Wide Belt Sander with (3) Sanding Heads; Roller, Roller and Combination Head Roller...
Read More
Comment: A very basic 3-head sander for under $ 50,000!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC EXPLORER 1300 3RRK ... Wide Belt Sander with (3) Sanding Heads; Roller, Roller and Combination head r...
Read More
Comment: A basic 3-head sander for under $ 50,000
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC EXPLORER 1300 SUPER 2RK with TAMPICO Brush Roller... Wide Belt Sander with (2) Sanding Heads: Roller and Combination...
Read More
Comment: Long 2,200 mm (87") belts. Versatile full options machine.
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC EXPLORER 1300 SUPER 3RRK with TAMPICO Brush Roller... Wide Belt Sander with (3) Sanding Heads: Roller, Roller&...
Read More
Comment: Long 2,200 mm (87") belts. Versatile full options machine.
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC FLEXY 1350 2RF Finishing Sander with (2) Sanding Heads, Roller and Superfinishing Pad
Useful working width 1...
Read More
Comment: Heavy Duty Wide Belt - in most common 2-Head configuration!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC FLEXY 1350 3RPP Finishing Sander with (3) Sanding Heads, (1) Roller and (2) Segmented Finishing Pads
Us...
Read More
Comment: Heavy Duty Wide Belt - in most common 2-Head configuration!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC FLEXY 1350 3TKFb Finishing Sander, (3) Sanding Heads - Cross Belt, Combination, Superfinishing + Brushing
Useful worki...
Read More
Comment: Versitile Configuration on a High Quality European Machine!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC FLEXY 1350 3TRF Finishing Sander with (3) Sanding Heads, Cross Belt, Roller, Superfinishing
Useful working width ...
Read More
Comment: A well equipped 3-Head for many diverse sanding applications!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC GIANT 1350 TTKF Calibrating Sander with (4) Sanding Heads: (2) Cross Belts, Combination Head Roller/Pad, Superf...
Read More
Comment: HEAVY DUTY, full feature 4-Head Sander at a very competitive ...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC MERCURY 1350 2RK ... Wide Belt Sander with (2) Sanding Heads; Roller and Combination head roller/pneumatic pad.
Versatile, medium duty machine, ideal for cabinet shops etc.
TECHNICAL DATA: Useful working width 1,350 mm (53"). Working thickness ...
Read More
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC R-evo Z 1350 Sanding & Polishing Center for multi-directional Superfinishing - Award-winning system!
Superfinishing ob...
Read More
Comment: A revolutionary, award-winning Sanding & Polishing Center!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC R-evo Z 1650 Sanding & Polishing Center for multi-directional Superfinishing - Award-winning system!
Superfinishing ob...
Read More
Comment: A revolutionary, award-winning Sanding & Polishing Center!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC ROTOPLUS 1350 – LUC (1)5 + BRILL 15 Polishing & Buffing Line
Heavy Duty Automatic Polishing & Buffing line for h...
Read More
Comment: "High Gloss" Finishing at its BEST!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC UNDERTOP 1300 2+2 - Wide Belt Sanding Line Top + Bottom, both with (2) Sanding Heads; Roller, Combination Head ...
Read More
Comment: Heavy Duty Wide Belt Sanding Line, Top + Bottom from EMC Ital...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC UNDERTOP 1300 2+2 - Wide Belt Sanding Line Top + Bottom, both with (2) Sanding Heads; Steel Roller, Rubber cove...
Read More
Comment: "Top & Bottom" Sanding line for abrasive material, such as Ce...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC UNDERTOP 1300 2RK+2RK - Heavy Duty Wide Belt Sander; Bottom + Top, both with (1) Contact Roller and (...
Read More
Comment: Heavy Duty Wide Belt Sander, Bottom + Top, "the best from Ita...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC UNDERTOP 1350 3RRR+3RRR - Heavy Duty Wide Belt Sanding Line Top + Bottom, both with (3) Contact Rollers.
Use...
Read More
Comment: 2 year warranty & money back guarantee after trial period of ...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC VENUS 1300 SUPER 2RK Finishing Sander with (2) Sanding Heads: Roller and Combination Head.
Useful working width 1...
Read More
Comment: Large Length Belts on this 2-Head EMC Sander!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC Woody 1100 2RK Calibrating Sander with (2) Sanding Heads: Roller (Drum) and Combination Head:
TECHNICAL DATA:&nbs...
Read More
Comment: A 2-Head 43" Wide Belt sander with large 75" belts for under ...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EMC Woody 1100 2RK Calibrating Sander, (2) Sanding Heads, Roller and Combination Head
TECHNICAL DATA: Useful worki...
Read More
Comment: Compact 2-Head 75" Belt length for less than $ 40,000 - deliv...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EXTREMA EXCESS XS-2A-37 Wide Belt Sander, (2) Head 37" Width cap. Drum, Roller platen Head Configuration 1st He...
Read More
Comment: WOW! Look at this! EXTREMA has a 2-head, 37" Wide Belt Sander...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EXTREMA XS-2B43 (2) Head Wide Belt Sander
43" Width cap. Drum, Combination Head
Head Configuration:
1st Head: 8" Diameter...
Read More
Comment: Reconditioned, you can't go wrong
Year of Mfg:
Cond: Reconditioned
|
|
EXTREMA PERFORMA XS-2B-43 DUAL HEAD WIDE BELT SANDER
Note: Model is XS-2P43 replaces XS-2B43 same spec's
43" Width...
Read More
Comment: When you need a little more width and faster production, coun...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EXTREMA PERFORMA XS-2P52 Wide Belt Sander (2) Heads;
52" Width cap. Drum, Roller and Platen - 75” Belt Len...
Read More
Comment: Powerful and sturdy, the EXTREMA 52" 2-head can get it done!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
Mono-block construction to increase durability. Combination sanding head with rubber covered contact roll & graphite covered pl...
Read More
Comment: A big 3-head 52" sander from EXTREMA, this XS-3M52 is a great...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EXTREMA XSP-1B-37 Knife Planer/Sander, (2) Heads - 37" width capacity, Planer Head, Combination sanding head Head Configura...
Read More
Comment: The MONO BLOCK construction makes for the most stable and vib...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
EXTREMA XSP-1B-43 Knife Planer/Sander (2) Heads 42" Width cap. Stealth Helical Planer Head, Combination sanding head Head C...
Read More
Comment: The EXTREMA "XSP" Planer/Sander offers a rugged construction ...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
GRAINMATIC CP-960 Wide Belt Sander (2) Heads
42" Width cap. Drum, Platen
Head Configuration:
1st Head: - Spira...
Read More
Comment: Great sander for smaller shop and well priced
Year of Mfg: 2011
Cond: Cleaned and checked
|
|
HEESEMANN DBV-2 Feed Through Cross Belt Sander
Specifications
Feed through Cross belt sander with (2) sand belts 6" x 395" ...
Read More
Comment: Rare find in this condition, and it's a Heesemann
Year of Mfg:
Cond: Good Condition
|
|
HEESEMANN HSM 3 Wide Belt sander with (3) heads,
53" width cap, Crossbelt, Drum, Drum
Head configuration
1st Head: Cross...
Read More
Comment: If this is what your are looking for , do not hesitate
Year of Mfg: 2016
Cond: Excellent condition
|
|
This is a Very Special Extra Wide HEESEMANN KSA 8 CSD "Lacquer / Sealer" Sander with a Belt width of 80 inches !!
Equipped...
Read More
Comment: For those Extra wide parts that need to be Sealer or Primer s...
Year of Mfg: 2007
Cond: Very good condition
|
|
HEESEMANN KSA 8-U BOTTOM 2-Head Wide belt sanding machine, equipped with (2) bottom sanding heads and brush roller unit, working w...
Read More
Comment: UNIQUE opportunity, HEESEMANN bottom sander, we also have the...
Year of Mfg: 2006
Cond: Excellent condition
|
|
HEESEMANN LSM 8-4 -Head Wide Sanding Line with (4) Heads
53" Width cap. Platen, Cross Belt, Cross Belt, Platen
Head Configur...
Read More
Comment: It's a Heesemann and well priced
Year of Mfg:
Cond: Good Condition
|
|
HEESEMANN LSM-8 Wide Belt Sander (2) Heads
54" (1,300 mm) max. width (1) Segmented cross-belt & (1) Longitudinal segmented plat...
Read More
Comment: You can't go wrong, it's a Heesemann!
Year of Mfg: 1997
Cond: Good Condition
|
|
HEESEMANN LSM-8 Wide Belt Sander, (3+1) Heads
54" (1,300 mm) max. width (2) Segmented cross-belt & (1) Longitudinal segmented p...
Read More
Comment: This is a well priced Heesemann, do not hesitate!
Year of Mfg: 2001
Cond: Very good condition
|
|
Heesemann LSM 8 Three Head Wide Belt Sander
53" Width cap. Crossbelt, Combination , Drum
Head configuration
1st:Head:&n...
Read More
Comment: This is a rare find, Do not hesitate
Year of Mfg: 2008
Cond: Very good condition
|
|
2012 Heesemann MFA10/LSM8OSR Sanding Line, Total (7) Heads
MFA-10 53" Width cap., 4-Heads
Head Configuration: &...
Read More
Comment: This is a rare find in this condition, plus it's a Heesemann
Year of Mfg: 2006/20
Cond: Very good condition
|
|
HOLYTEK MHB 242 Top/Bottom Wide Belt Sander
Heavy-duty and powerful double surface sander providing significant time saving and i...
Read More
Comment: Compact top and bottom sander
Year of Mfg: 2002
Cond: Good Condition
|
|
INFOTRONIC RYKsf SAVE 3-Head Wide Belt Sanding Machine;
This machine is especially suitable of sanding panels of different shap...
Read More
Comment: For sanding different shapes. High quality top brand! Rare fi...
Year of Mfg: 2014
Cond: New, Never Used
|
|
KUNDIG 650/24 Two (2) Head Wide Belt Sander
24" Width cap. Drum, Drum & Finishing Platen
Head Configuration
1st Head...
Read More
Comment: If your handy this is a good investment!
Year of Mfg: 1999
Cond: As Is Condition
|
|
KUNDIG TOPIQ 2-43 RC Wide Belt Sander (2) Heads;
43" width cap. Drum, Combination Head,
Head Configuration: 1st Head:&nbs...
Read More
Comment: It's a Kundig you can't go wrong
Year of Mfg: 2001
Cond: Good Condition
|
|
KUNDIG TRIPLEX RRC (3) Head Wide Belt Sander
43" Width cap. Drum, Drum, Platen
Head Configuration:
1st Head: Smooth...
Read More
Comment: Nice looking sander and well priced
Year of Mfg: 2006
Cond: Very good condition
|
|
OLIVER 5390 DUAL HEAD WIDE BELT SANDER
1/8" to 6" thickness capacity 36" Width capacity. Equipped with: 20 HP main drive motor, 2...
Read More
Comment: A "Bargin Priced" Dual head OLIVER Wide Belt Sander!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
POWERMAX POM PR_43DDA Wide Belt Sander (3) Heads 43" Width cap. Drum, Drum finishing Platen Head Configuration: 1st Head: 9" Rub...
Read More
Comment: Affordable 3 head sander
Year of Mfg:
Cond: Cleaned and checked
|
|
RAND-BRIGHT S-SP36x75 Wide Belt Sander (2) Heads
36" Width cap. Drum, Combination head
Head Configuration:
1st Head: 6" D...
Read More
Comment: Great sander for smaller type shop
Year of Mfg: 2002
Cond: Good Condition
|
|
SANDINGMASTER CSB2-900 Wide Belt Sander, (2) Heads
36" Width cap. and equipped with Drum and Platen.
Head Configuration...
Read More
Comment: Nice sander for a smaller shop and well priced
Year of Mfg:
Cond: Good Condition
|
|
SANDINGMASTER SA3300-900 TRIPLE HEAD WIDE BELT SANDER
3-Head, 36" max. width cap. - 1st Head: 11" Dia. rubber covered contact r...
Read More
Comment: Cleaned and checked prior to shipment
Year of Mfg:
Cond: Cleaned and checked
|
|
SANDINGMASTER SCSB-2 900 DUAL HEAD WIDE BELT SANDER
2-Head, 36" width cap. - 1st Head: 11" Dia. rubber covered contact roll, 30...
Read More
Comment: Purchased second hand, but never placed back under power. Mak...
Year of Mfg: N/A
Cond: Good condition
|
|
SANDINGMASTER SCSB-2 900 (2) HEAD WIDE BELT SANDER
36" Width cap. Drum, Platen
Head Configuration
1st Head: 11...
Read More
Comment: Great starter sander
Year of Mfg:
Cond: Fair Condition
|
|
SANDINGMASTER SCSB-2 900 DUAL HEAD WIDE BELT SANDER
2-Head, 36" width cap. Drum, Platen
Head Configuration
1st Head: 11" ...
Read More
Comment: This is a true workhorse
Year of Mfg: 1990
Cond: Good Condition
|
|
SBF Stefani Wide Belt Sander Top & Bottom (8) Heads
1,350 mm (53") Width capacity, Top (4) rollers and ...
Read More
Comment: This machine will be fully reconditioned before shipping!
Year of Mfg: 2003
Cond: Reconditioned
|
|
SCMI SANDYA 20 ( 20 M2 135 ) Wide Belt Sander 2 Heads
(2) Head 53" Width capacity , Drum, Combination Head
Head C...
Read More
Comment: Nice looking sander, well priced especially for 103" abrasive...
Year of Mfg: 2002
Cond: Good Condition
|
|
SCMI SANDYA 3 Wide Belt Sander (2) Heads
37" Width cap. Drum, Combination Head
Head Configuration:
1st Head:&nb...
Read More
Comment: Still lots of life left in this Sandya 3
Year of Mfg: 1998
Cond: Good Condition
SOLD
|
|
SCM SANDYA 40 M3 135 Wide Belt Sander (3) Heads
52" Width cap. Drum, Drum, Combination Head
Head Configuration:
1st Head:...
Read More
Comment: Nice 3 head wide belt sander, well priced
Year of Mfg: 1998
Cond: Good Condition
|
|
SCM SANDYA 7 RRCS Wide Belt Sander (2) Heads
42" Width cap. Drum, Combination Head
Head Configuration. -&n...
Read More
Comment: Nice looking sander, great value
Year of Mfg: 2000
Cond: Very good condition
|
|
SCM SANDYA CLK 3 G - 3-Head Wide Belt Sander 1,100 mm (43") working width. Equipped with (2) Contact rollers and (1) Fine san...
Read More
Comment: Good condition machine, well equipped.
Year of Mfg: 2000
Cond: Good Condition
|
|
SCMI UNO RCS Dual Head Wide Belt Sander
2-Head, 36" Width capacity and with 1/8" to 6" thickness capacity. 1st Head 5"...
Read More
Comment: This is an older machine, but in great condition!
Year of Mfg:
Cond: Good Condition
|
|
SHENG-SHING SDM 2-37 Dual Head Wide belt Sander;
2-Head, 36" width capacity, 5" thickness capacity. An excellent solid wood or ...
Read More
Comment: A very nice 2-Head Wide Belt Sander at a Great Price!
Year of Mfg: 2003
Cond: Excellent condition
|
|
STEINEMANN Type OSUS 190 FS Wide Belt Sander with the following features: (1) set of top & bottom opposed heads; motorized...
Read More
Comment: A nice Machine with plenty of service to go!
Year of Mfg: 1980
Cond: Good Condition
|
|
STEINEMANN OSUS NOVA 190 FS ASYM Panel Board Sander
Specification: 2-Head fully reconditioned by dealer, 73" (1,900 mm) widt...
Read More
Comment: This is a rare find
Year of Mfg: 1971
Cond: Fair condition
|
|
TIMESAVERS 137-2HD Double Head, 36" wide belt sander.
2-Head, 36" width cap. - 1st Head: 6" Dia. rubber covered contact r...
Read More
Comment: Oldie but Goodie! Check out the amazing condtion.
Year of Mfg: 1988
Cond: Good Condition
|
|
TIMESAVER 137-2HD60 Wide Belt Sander (2) Heads
36" Width cap., Drum - Platen
Head Configuration:
1st Head: 6" d...
Read More
Comment: Great starter sander for a smaller type shop!
Year of Mfg: 1997
Cond: Good Condition
|
|
TIMESAVERS 137-2 HP 75 WIDE BELT SANDER (2-HEADS)
2-Head, 36" width cap. - 1st Head: 6" Dia. rubber covered contact roll, 25 HP motor; 2nd Head: 2-1/2" Wide finishing platen, 15 HP motor. 37" x 75" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 1.5 HP Variable feed spe...
Read More
Year of Mfg: 2000
Cond: Very good condition
|
|
TIMESAVER 143-2HP75 WIDE BELT SANDER (2) HEADS
43" Width cap. Drum, Platen
Head Configuration:
1st Head: 6" Dia. ru...
Read More
Comment: This is a well equipped Timesaver
Year of Mfg: 2000
Cond: Good Condition
|
|
TIMESAVERS 2321-24-01 Wide Belt Sander (2) Heads
42" width cap. Drum, Combination Head
Head Configuration:
...
Read More
Comment: It's a Timesaver you can't go wrong
Year of Mfg: 2011
Cond: Very good condition
|
|
TIMESAVERS 2321-24-01 Wide Belt Sander, (2) Heads
42" width cap. Drum, Combination Head
Head Confi...
Read More
Comment: Nice looking sander & it's a TIMESAVER!
Year of Mfg: 2012
Cond: Very good condition
|
|
TIMESAVERS 237-2 DUAL HEAD WIDE BELT SANDER
36" Width capacity; Drum, Drum
Head Configuration:
1st Head: Steel conta...
Read More
Comment: It still has life left in it, it's a TIMESAVER!
Year of Mfg: 1990
Cond: As Is Condition
|
|
TIMESAVER 237-3 IC Wide Belt Sander:
3-Head, 36" cap. - Drum, Drum, Finishing Platen. 1st Head: Rubber covered contact roll...
Read More
Comment: Motivated seller says "MAKE A REASONABLE OFFER"!
Year of Mfg: 1992
Cond: Very good condition
|
|
TIMESAVERS 243-31-C (3) Head Wide Belt Sander
43" Width cap, Drum , Drum, Platen
Head Configuration
1st Head: 9-1/2" Dia....
Read More
Comment: It's a Timesavers, you can't go wrong
Year of Mfg: 1998
Cond: Good Condition
|
|
TIMESAVER 337-2 Wide Belt Sander, (2) Heads
36" Width cap., Drum, Combination Head
Head Configurations:
1st Hea...
Read More
Comment: It's a Timesaver, you can't go wrong, this is a workhorse
Year of Mfg:
Cond: Good Condition
|
|
TIMESAVERS 4321-45-01 52" 2-Head Wide Belt Sander
Head Configuration:
1st Head: 9-1/2" Dia. Rubber-covered contact roll, Infeed & outfeed spring-loaded hold-down shoes & pinch rolls, 40 HP Motor.
2nd Head: Combination head, with 6" Dia. Rubber-covered contact roll & 2-1/2" W Plate...
Read More
Year of Mfg: 2002
Cond: Good Condition
SOLD
|
|
TIMESAVER TB-440-4 Wide Belt Sander (2) Heads
40" Width cap. Drum, Combination Head
Head Configuration
1st Head - 50...
Read More
Comment: This is truly a good buy, older sander but well maintained
Year of Mfg: 1974
Cond: Good Condition
|
|
VIET CHALLENGE 321B Wide Belt Sander (3) Sanding Heads:
43" Width cap. Drum, Drum, Platen
Head Configuration: 1st Head:...
Read More
Comment: Well equipped and well priced
Year of Mfg: 2001
Cond: Very good condition
|
|
VIET S1-323 Calibrating Wide Belt Sander (3-Head - 53" Capacity)
53" Width cap Drum, Drum, Combination head
Head C...
Read More
Comment: Great calibrating sander and well priced
Year of Mfg: 2004
Cond: Good Condition
|
|
VIET S2 323 2200 RRKRT (drum, drum, combi drum/pad) Wide Belt (3-Head 53") Solid Wood & Veneer Sander:
Specification...
Read More
Comment: Excellent condition machine. Act fast...it's available at the...
Year of Mfg: 2015
Cond: Excellent condition
|
|
VIET S219 R/RKT Calibrating Wide Belt Sander.
Solid Wood and Thick Veneer Sander
Specifications: 2-Head with (1) ...
Read More
Comment: A nice "compact" 2-Head "multi purpose" Wide Belt!
Year of Mfg: 2004
Cond: Very good condition
|
|
VIET S3 T T23TM - Two-Head Wide Belt Sander with (2) Cross Heads.
1,350 mm (53") working width, constant pass-line. Equip...
Read More
Comment: In superb condition. Rare find with two cross belts. With HP ...
Year of Mfg: 2007
Cond: Very good condition
|
|
VIET TARGET 110 - 3-Head Wide Belt Sander for Calibrating.
1,110 mm (43") working width; equipped with (3) Contact rollers...
Read More
Comment: Top brand in top condition!
Year of Mfg: 1995
Cond: Very good condition
|
|
WEBER KS 4-1350 Wide Belt Sander: (4) Head:,
52" cap. Drum, Drum, Crossbelt, Segmented platen
Head Configuration:
1st Hea...
Read More
Comment: Nice looking sander, do not hesitate
Year of Mfg: 2004
Cond: Good Condition
|