BIESSE AKRON 840 Single-Sided Edgebander;
Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood. Edge & Workpiece Capacity: 0.4 - 3 mm (0.016 - 0.12") Edge; 10 - 60 mm (0.39 - 2.36") panel thickness; 140 mm (5.5") min. panel length, and 50 mm (...
Read More
Year of Mfg: 2006
Cond: Very good condition
|
|
BIESSE AKRON 855 Computer Controlled Production Edgebander
Features & Main Specifications: Computer-controlled interface for...
Read More
Comment: Motivated seller, please make offer!
Year of Mfg: 2006
Cond: Very good condition
|
|
BIESSE SPARK 3.3 EDGEBANDER (COMPACT)
0.4 mm to 3 mm material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm...
Read More
Comment: A Condition like this AND less than 1/2 PRICE of a NEW ONE!
Year of Mfg: 2015
Cond: Very good condition
|
|
BIESSE SPARK 3.3 Edgebander (Compact)
0.4 mm to 3 mm material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm...
Read More
Comment: Nice machine at an affordable price.
Year of Mfg: 2019
Cond: Very good condition
|
|
BIESSE SPARK 3.3 Edgebander (Compact)
0.4 mm to 3 mm material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm...
Read More
Comment: Small and compact Edgebander!
Year of Mfg: 2016
Cond: Very good condition
|
|
BIESSE SPARK 4.8 EDGEBANDER
0.4 mm to 3 mm Material thickness. Panel thickness 10 mm (0.39') min.&n...
Read More
Comment: Under Power & available for inspection!
Year of Mfg: 2012
Cond: Very good condition
SOLD
|
|
BRANDT F-13 Top & Bottom Trimmer
For simultaneous top & bottom flush/radius trimming of the oversized edgeband on straight...
Read More
Comment: Cleaned, checked, and ready to go!
Year of Mfg: 2002
Cond: Very good condition
SOLD
|
|
BRANDT KD-54 SINGLE SIDED EDGEBANDER
0.4 - 2 mm (5/64") Edge thickness cap., 40 mm max. panel thickness, 60 mm min. width and 1...
Read More
Comment: "Good" Condition machine at an "Excellent" price!
Year of Mfg: 1996
Cond: Good Condition
|
|
BRANDT - "OPTIMAT KD 78/2 C" Edgebander with Corner Rounding
Edgebander with QUICKMELT Pre-melt System and Corn...
Read More
Comment: With corner rounding - 4,852 Hrs only! !
Year of Mfg: 2001
Cond: Good Condition
|
|
BRANDT KD-79 2CF EDGEBANDER WITH CORNER ROUNDING
0.4 - 13 mm (0.016" - 1/2") Edge thickness cap., automatic coil & strip ...
Read More
Comment: Very low price! Requires new control panel - Still Make offe...
Year of Mfg: 2001
Cond: As Is Condition
|
|
BRANDT KDF 780 2C EDGEBANDER WITH PRE-MILL AND CORNER ROUNDING
Basic Specifications: 0.4 - 15 mm (5/8") Edge cap.,...
Read More
Comment: Well maintained, good looking machine! Seller says "Make a re...
Year of Mfg: 2003
Cond: Very good condition
|
|
BRANDT KDN 210B Edgebander:
0.4 - 3 mm (1/8") Edge thickness cap., 8 - 50 mm (0.3" - 2") panel thickness, 60 mm (2.3") min. pan...
Read More
Comment: Original owner was a technical School. Very low usage!
Year of Mfg: 2008
Cond: Very good condition
|
|
BRANDT KDN 520 EDGEBANDER
0.4 - 8 mm (5/16") Edge cap., panel thickness 15/32" - 2-5/32", min. panel length 160 mm (6-3/8"...
Read More
Comment: Popular/proven model.
Year of Mfg: 2006
Cond: Good Condition
|
|
BRANDT KTD 72 ... Contour Edgebander;
Features & Specifications: Designed for straight & curved edgebanding....
Read More
Comment: Under power & available for inspection...Well Maintained mach...
Year of Mfg: 2000
Cond: Good Condition
|
|
CAM-WOOD - KT3.4 RRS, ...Edgebander. Compact - Single Sided (Mfg. in Italy).
0.4 mm - 3 mm Max. edge thickness cap., 10 m...
Read More
Comment: This Italian "Built & Engineered" Edgebander at a price that ...
Year of Mfg: 2008
Cond: New, Never Used
|
|
CANTEK MX340M EDGEBANDER
The MX340 from CANTEK is designed to be a compact, and durable edgebander. This machine is equipped...
Read More
Comment: Edgebander was used for approximately 1 year before health is...
Year of Mfg: 2018
Cond: Excellent condition
|
|
CANTEK MX340M Edgebander (Single Phase):
The MX340 from CANTEK is designed to be a compact, and durable edgebander. This mac...
Read More
Comment: Single Phase Edgbander with features only found on larger mac...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
CASADEI ALA 5R CONTOUR TRIMMING DEVICE
Specifications: (2) 1 HP motors Two vertical copying de...
Read More
Comment: Well maintained coutour edge trimmer
Year of Mfg: 2010
Cond: Very good condition
|
|
CEHISA EP-8 EDGEBANDER
3/16" Cap., Min. panel size: Length 4-3/4", width 3" and thickness 3/8" up to 2", unlimited max. length ...
Read More
Comment: A great starter machine.
Year of Mfg: 2003
Cond: Very good condition
|
|
CEHISA EP-9 Single Sided Edgebander
0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt gl...
Read More
Comment: Motivated seller says "MAKE A REASONABLE OFFER"!
Year of Mfg: 2008
Cond: Very good condition
|
|
COMEVA BASIC C Contour Edgebander
Designed for straight or curved (contour) edge banding.
Working capacity: 0....
Read More
Comment: European brand Contour Edgebander distributed in the US exclu...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
COMEVA COMPACTA 3 Edgebander (Compact size):
0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 50 mm (0.75" - 2") panel thickness cap. (when edgebanding 3 mm PVC max. thickness is 40 mm). Minimum panel dimensions 100 mm wide x 160 mm long (3.9" x 6.3").
Equipped with: Automatic ...
Read More
Year of Mfg: 2016
Cond: Very good condition
|
|
COMEVA COMPACTA 3 Edgebander (Compact size):
0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 50 mm (0.75" - 2") panel thic...
Read More
Comment: An exceptional value on a BRAND NEW COMEVA Edgebander!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
COMEVA - COMPACTA 4, ...Edgebander (Compact size).
0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 50 mm (0.393" - 2") panel th...
Read More
Comment: One of the best values in its Class!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
COMEVA COMPACTA 4 D Edgebander:
0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 50 mm (0.75" - 2") panel thickness c...
Read More
Comment: Edgebander manufactured in Europe for a very good price!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
COMEVA COMPACTA 4 Door Edgebander (Compact size):
Edgebander with TILTING GLUING and PRESSURE SECTION especially desi...
Read More
Comment: The only edgebander for tilted pieces you will find in this p...
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
COMEVA CUBE 2 Edgebander (Single Phase):
The CUBE 2 from COMEVA is designed to be a very compact ...
Read More
Comment: Brand new compact COMEVA Edgebander with factory warranty
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
COMEVA CUBE 3 Edgebander (Single Phase):
The CUBE 3 from COMEVA is designed to be a very compact "every day...
Read More
Comment: Well equipped single-phase edgebander made in Spain!
Year of Mfg: 2022
Cond: New, Never Used
NEW
|
|
COMEVA PRIMA 2 EDGEBANDER
0.4 - 2 mm Thickness entry level Edgebander Equipped with Teflon coated glue pot for granulated glue....
Read More
Comment: Brand new entry level Edgebander!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
FELDER G500 COMPACT EDGEBANDER
Equipped with: Automatic coil feed & manual strip feed magazine. Heated infeed fence, Tefl...
Read More
Comment: A Machine like this doesn't come on the market often!
Year of Mfg: 2018
Cond: Very good condition
FEATURED
|
|
FLETCHER FM-2000 Contour Edgebander
Specifications: 0.4 mm to 2 mm Banding thickness, up to 2" panel thickness, Unit to ru...
Read More
Comment: FLETCHER MACHINERY. A name synonymous with quality
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
FLETCHER MACHINERY FM 2001 TOB & BOTTOM EDGEBANDING TRIMMER Specifications:
For straight & curved edgebanded panels; (2) spind...
Read More
Comment: Very well maintained machine.
Year of Mfg:
Cond: Very good condition
|
|
FRAVOL A 16/S CONTOUR EDGEBANDER
Edge cap. 0.4 - 3 mm (1/8") thickness and up to 2-3/8" height. Hot melt glue system - applies glue to panel or edge, variable glue applicator roller & banding material feed 11 - 49 FPM. Straight panels are banded in a feed through like process, shaped/curved panel...
Read More
Year of Mfg: 2002
Cond:
|
|
FRAVOL SMART S4 EDGEBANDER
7.9 MM (5/16") Cap. edgebanding thickness; min. panel width of 2-3/8" and min. panel length of 4-3/4...
Read More
Comment: A little bit of work is going to make it work like new
Year of Mfg: 2004
Cond: Good Condition
|
|
GIBEN KS26J Edgebander with Pre-Milling & Corner Rounding
Specifications: Edge thickness 0.4 - 3 mm. Minimum panel w...
Read More
Comment: An exceptionally well-maintained machine - something you rare...
Year of Mfg: 2011
Cond: Very good condition
|
|
HOLZ-HER 1310 EDGEBANDER
Cartridge glue system (1906M), 3 mm edge thickness cap., 6 - 45 mm panel thickness, 60 mm min. panel w...
Read More
Comment: Motivated seller says "MAKE A REASONABLE OFFER"!
Year of Mfg: 2005
Cond: Very good condition
|
|
HOLZ-HER 1310 EDGEBANDER
Cartridge glue system (1906M), 3 mm edge thickness cap., 6 - 45 mm panel thickness, 60 mm min. panel w...
Read More
Comment: A very productive machine for a very attractive price!
Year of Mfg: 2005
Cond: Very good condition
SOLD
|
|
HOLZ-HER 1317 SPRINT EDGEBANDER WITH PRE-MILLING AND CORNER ROUNDING
0.4 - 8 mm edge thickness; 6 - 45 mm panel thickness, 60 mm min. panel width and 180 mm min. length. PLC controlled machine with w/Glue Cartridge System;
Equipped with: Automatic magazine Coil & Strips (1...
Read More
Year of Mfg: 2008
Cond: Good condition
FEATURED
|
|
HOLZ-HER 1320 SPRINT SINGLE SIDED EDGEBANDER WITH CORNER ROUNDING:
Specifications: 0.3 - 15 mm Thickness Edgebanding capability (3 mm coil or 15 mm max. strip); 6 - 50 mm panel thickness, work piece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM). "190...
Read More
Year of Mfg: 2008
Cond: Very good condition
|
|
HOLZ-HER 1321-2 Sprint ... Edgebander with Pre-Milling
Specifications: Capacity:
0.3 - 15 mm thickness edge...
Read More
Comment: The Sprint 1320 is easy to live with and produces high qualit...
Year of Mfg: 2004
Cond: Cleaned and checked
|
|
HOLZ-HER 1402 HF COMPACT EDGEBANDER
Cartridge glue system, 3 mm edge thickness cap., semi-automatic feed magazine, coil stock fee...
Read More
Comment: Easy to use. Great starter bander.
Year of Mfg: 1999
Cond: Good Condition
|
|
HOLZ-HER 1402 SF Edgebander
Cartridge glue system, 3/16" (5 mm) edge thickness cap. & includes 3 mm PVC, 2" max. banding h...
Read More
Comment: A great buy on a well maintained compact HOLZ-HER!
Year of Mfg: 2000
Cond: Very good condition
|
|
HOLZ-HER 1408 EDGEBANDER: Specifications:
Cartridge glue system, 3/4" max. edgebanding thickness, 1/4" - 2-1/2" panel thicknes...
Read More
Comment: Under Power & Available for Inspection!
Year of Mfg: 1985
Cond: Good Condition
|
|
HOLZ-HER 1435-SE EDGEBANDER
Cartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine c...
Read More
Comment: Late model productive machine in good shape!
Year of Mfg:
Cond: Very good condition
|
|
HOLZ-HER 1436 SE EDGEBANDER
Cartridge glue system, 3/16" (5 mm) edge thickness cap., automatic magazine coil & strips, 3 mm PVC...
Read More
Comment: Older HOLZ-HER Edgebander but well maintained.
Year of Mfg: 1994
Cond: Very good condition
SOLD
|
|
HOLZ-HER 1436 SE PRIMUS EDGEBANDER WITH CORNER ROUNDING
Max. 5/16" (8 mm) solid wood banding & 4 mm PVC cap., 1-3/4" max. panel...
Read More
Comment: Motivated seller is upgrading & says "Make me a reasonable of...
Year of Mfg: 1999
Cond: Very good condition
|
|
HOLZ-HER 1436 SE PRIMUS EDGEBANDER WITH CORNER ROUNDING
Max. 5/16" (8 mm) solid wood banding & 4 mm PVC cap., 1-3/4" max. panel...
Read More
Comment: A very productive machine for a very attractive price!
Year of Mfg: 1998
Cond: Good Condition
|
|
Max. 1" (25 mm) solid wood banding & 3 mm PVC cap., 2-3/8" (60mm) max. panel thickness and 5-1/2" min. panel length. Equipped with: 1906 Cartridge glue system (gravity hopper style), automatic magazine for coil, strip & solid edgebanding; HD guillotine for 3 mm PVC. Pressure section with (1) l...
Read More
Year of Mfg: 2007
Cond: Good condition
|
|
HOMAG OPTIMAT BAK 41/45/G FLAT TABLE MACHINE (W/EDGEBANDING): Specifications:
Working capacity "X" Axis 17...
Read More
Comment: Under power & available for inspection"!
Year of Mfg: 2001
Cond: Good Condition
|
|
HOMAG OPTIMAT KL-75 / A20 EDGEBANDER
0.4 - 20 mm (3/4") Thickness edgebanding cap., 70 mm min. panel thickness.
...
Read More
Comment: A little bit of work is going to make it look like new!
Year of Mfg: 2001
Cond: Cleaned & Checked
|
|
LAGUNA BANDIT 2/3 TF EDGEBANDER 0.4 - 1.5 mm Edge thickness cap. w/automatic cutoff up to 0.8 mm (1/32"). Features: The glue p...
Read More
Comment: Machine used part time with relatively few hours. Is in grea...
Year of Mfg: 2017
Cond: Excellent condition
SOLD
|
|
MAGGI SYSTEM 3-50 SINGLE PHASE COMPACT EDGEBANDER
0.4 to 3mm PVC tape and 0.4 to 2mm Wood Strips. Panel thickness: 1/2" to...
Read More
Comment: Cleaned, checked and ready to go!
Year of Mfg: 2018
Cond: Very good condition
|
|
SAFETY SPEED MFG 60HA Hot Air Edgebander;
Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in a...
Read More
Comment: Purchased new in 2021 for one project.
Year of Mfg: 2021
Cond: Like New
|
|
SAFETY SPEED MFG 60HA Hot Air Edgebander;
Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in a...
Read More
Comment: A great Hot Air Bander
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
Safety Speed Mfg. now offers, The 72GP Edgebander that is small in price yet big in ability. The NEW 72GP features: Digital P.I...
Read More
Comment: No better machine on the market in this class!
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
SCM OLIMPIC K 201 PLUS EDGEBANDER
1/8" Max. edge cap., and 1-1/2" max. panel thickness; semi-automatic strip & coil feed ...
Read More
Comment: One of the most well known compact edge bander!
Year of Mfg: 2004
Cond: Good Condition
|
|
SCM K 203 E Edgebander (Compact)
5/16" (7.9 mm) Max. edge cap. for strip feeding, 1/8" (3 mm) for coil feeding; 60 mm min. pane...
Read More
Comment: A Condition like this AND a fraction of what a new one costs!
Year of Mfg: 2000
Cond: Good Condition
|
|
SCM OLIMPIC K208ER EDGEBANDER WITH CORNER ROUNDING
15/32" (12 mm) Max. edge cap., 2" max. (w/corner rounding only 1-3/4") bandi...
Read More
Comment: An exceptionally well-maintained machine - something you rare...
Year of Mfg: 2001
Cond: Very good condition
FEATURED
|
|
SCM SELECTA 25 EDGEBANDER
1" Cap. edgebanding thickness and 3/8" to 2" height; min panel length 7-7/8" and min. width 4-3/8". A...
Read More
Comment: Machine comes with two extra top and bottom motors
Year of Mfg: 1996
Cond: Fair condition
|
|
TECNOMA XT10.3 RS Single Sided Edgebander
5/16" (5 mm) Max. edge cap., 1-1/2" (40 mm) Max. banding height, 2-3/8" (60 mm) min. pa...
Read More
Comment: Nice and compact machine
Year of Mfg: 2011
Cond: Good Condition
|
|
VITAP "RC 92" TOP AND BOTTOM EDGE TRIMMER
For straight & curved edgebanded panels; (2) spindles (one top & one bottom) 0.75 HP - ...
Read More
Comment: An GREAT addition for your Contour Edgebanding operations
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|