BUSELLATO
"JET 200 RT "
CNC ROUTER (NESTED-BASE)
.
CONDITION REPORT DONE BY CERTIFIED DEL-MAC TECHNICIAN!
The Jet 200 tested ok. It is in good condition.
Tested:
X,Y, Z axis; All axis checked ok.
Electrospindle started up and ran with no problems. I made a program and picked up a tool from the carousel to check for alignment. The manual push button on the tool magazine tested ok. I ran the boring head and checked all the electrovalves for each bit location. The unloading device function was also tested. The wiring and airlines on the machine are in good condition.
This is a list of the features on the Jet 200 RT:
Evoulution Control 7.0, (2) working areas N,M , set up for pendulum processing, auto lube, equipped with feed rate override, boring head has drills 1 thru 9 in y, 9 thru 19 in x (32mm) spacing, horizontal drills (1) in y (3) in x. boring head is equipped with saw that accepts 120mm blade, electrospindle is Omlat 18000 rpm max, (15) position tool changer, (1) tool holder at end of machine for large aggregates, it has (4) reference pins on front (1) on each end of machine
Safety Features: Safety mats on front of RT has 3 zones, safety cable, fence surrounds back of RT with gate interlock, push off table
CRATED AND READY TO BE SHIPPED...
2007
Excellent condition
Price:
$ 110,000
|
|
|
LAGUNA
"LT 16HD "
BAND SAW (RESAW)
.
Approximately 8 years old!...
2002
Very good condition
Price:
$ 1,900
|
|
|
PARK INDUSTRIES
"SIERRA "
BRIDGE SAW
.
...
2006
Fair Condition
Price:
$ 23,500
|
|
|
MONTRESOR
"LUNA 740 "
EDGE POLISHER (MULTI HEAD)
.
...
2004
Good condition
Price:
Call for price
|
|
|
RC
"RENEGADE "
BRIDGE SAW
.
US made!...
2010
Brand new with warranty
Price:
$ 29,900
|
|
|
UNIQUE
"319SS "
AUTOMATIC SHAPER (RAILS)
.
BRAND NEW MACHINE AT A DISCOUNTED PRICE!...
NEW
New, Never Used
Price:
$ 24,450
|
|
|
RAIMANN
"KM-310 1M "
DIP CHAIN GANG RIP SAW
.
Great price on a late model saw!...
2005
As-Is, good or bad
Price:
$ 29,150
|
|
|
ALTENDORF
"F-45 ELMO-3 "
SLIDING TABLE SAW (PROGRAM.)
.
Why buy a NEW PROGRAMMABLE "F-45" when you can get this "Like New" S007 saw for THOUSANDS less. - Give us a call!...
2007
Very good condition
Price:
$ 29,890
|
|
|
SCHELLING
"FXH "
FRONT LOAD, AUTOMATIC PANEL SAW
.
Seller States "Great machine with very low hours"!...
2004
Very good condition
Price:
$ 46,500
|
|
|
OMEC
"750 "
DOVETAILER (SINGLE SPINDLE)
.
A lot of machine & equipment value for the money! ...
2003
Very good condition
Price:
$ 10,900
|
|
|
JLT CLAMPS
"190A "
DRAWER CLAMP
.
The best clamp on the market for Drawers!...
Good condition
Price:
$ 1,200
|
|
|
JLT CLAMPS
"190B-M1 "
DRAWER CLAMP
.
A lot of machine & equipment value for the money! ...
2006
Excellent condition
Price:
$ 2,950
|
|
|
UNKNOWN
"UNKNOWN "
FORK LIFT RAMP
.
Ready to ship!...
Good condition
Price:
$ 8,750
|
|
|
PEERLESS/ARCHER
"F2 I55/8-72 "
RAILCAR LOADER
.
A Machine like this doesn't come on the market often! ...
1972
Good condition
Price:
$ 65,000
|
|
|
RITTER
"R-10 "
SINGLE SPINDLE SHAPER
.
Why buy a new one when "one like this" is available immediately! ...
1998
Very good condition
Price:
$ 4,200
|
|
|
WOOD-MIZER
"LT-300 "
STATIONARY SAWMILL
.
A lot of machine & equipment value for the money! ...
As-Is, good or bad
Price:
$ 36,900
|
|
|
PROGRESS
"6' X 6' "
CHIP SCREEN
.
A lot of machine & equipment value for the money! ...
Good condition
Price:
$ 6,450
|
|
|
PRECISION
"6' X 6' "
CHIP SCREEN
.
A lot of machine & equipment value for the money! ...
Good condition
Price:
$ 8,400
|
|
|
S A C
"SMART K-1100 "
WIDE BELT SANDER
.
Great entry level Sand and at this price, how can you go wrong!...
2001
Good condition
Price:
$ 9,800
|
|
|
BURLINGTON
"SP 36 X 55 HD "
WIDE BELT SANDER (1-HEAD)
.
The motor is currently wired for 230 V....
Good condition
Price:
$ 3,995
|
|
|
VECOPLAN
"RG 70/200 SPKN "
SLOW SPEED WASTE GRINDER
.
A lot of machine & equipment value for the money! ...
2004
Good condition
Price:
$ 139,500
|
|
|
CHALLENGER
"CG500 "
WOOD GRINDER
.
A lot of machine & equipment value for the money! ...
Good condition
Price:
$ 57,900
|
|
|
UNKNOWN
"PAC MAN 180 "
BUNDLE PANEL/LOAD TURNER
.
A Machine like this doesn't come on the market often! ...
Good condition
Price:
$ 9,500
|
|
|
KUPER
"KFE "
SHRINK WRAP LINE
.
Two Tandem wrappers, a rare find, in top condition and ready to work for you....
2003
Excellent condition
Price:
Call for price
|
|
|
EXTEND LIGHT
"GY-610-S "
TOP & BOTTOM PLANER
.
...
As-Is, good or bad
Price:
$ 11,900
|
|
|
MULTISCORE
"CA-6 "
PANEL RIP SAW
.
Seller States "Very clean and in great condition"...
Very good condition
Price:
$ 12,500
|
|
|
WOODMASTER
"W-718 "
PLANER (MOULDER)
.
This WOODMASTER PLANER also has a brand new Moulder attachment that has not yet been used. - Give us a call!...
2006
Very good condition
Price:
$ 1,850
|
|
|
EXTREMA
"XF-34.1 "
POWER FEEDER
.
A lot of machine & equipment value for the money! ...
2006
Very good condition
Price:
$ 700
|
|
|
CATERPILLAR
"950-F "
WHEEL LOADER
.
Very low hours!...
1991
Good condition
Price:
$ 59,500
|
|
|
RENZO BORGONOVO
"LCB-600 "
Continuous Roping Machine
.
...
2004
Very good condition
Price:
$ 32,500
|
|
|
EXCEL MFG
"EX-66 "
HORIZONTAL BALER
.
A lot of machine & equipment value for the money! ...
2002
Very good condition
Price:
$ 62,900
|
|
|
CALYPSO
"SHARK "
WATERJET
.
...
2000
Price:
$ 79,000
|
|
|
CALYPSO
"HH105 "
WATERJET
.
...
2007
Good condition
Price:
$ 99,000
|
|
|
CALYPSO
"HH510 "
WATERJET
.
...
2008
Reconditioned
Price:
$ 99,000
|
|
|
CALYPSO
"HAMMERHEAD "
WATERJET
.
Only 454 hOURS !...
2007
As-Is, good or bad
Price:
$ 89,500
|
|
|
CALYPSO
"HAMMERHEAD "
WATERJET
.
...
2004
As-Is, good or bad
Price:
$ 109,500
|
|
|
ESAB
"LR12 "
WATERJET
.
...
2005
As-Is, good or bad
Price:
$ 89,500
|
|
|
CANTEK
"ST-120A "
SINGLE END TENONER
.
...
Good condition
Price:
$ 5,400
|
|
|
EXTREMA
"WS-111 "
SINGLE SPINDLE SHAPER
.
A lot of machine & equipment value for the money! ...
2006
Very good condition
Price:
$ 950
|
|
|
MULTISCORE
"MR-21 "
PANEL RIP SAW
.
A Condition like this AND less than 1/2 PRICE of a NEW ONE! ...
2003
Very good condition
Price:
$ 21,800
|
|
|
WEIMA
"TIGER 600 "
HORIZONTAL WOOD GRINDER
.
Getting out of the manufacturing busines...call today....
2006
Very good condition
Price:
$ 39,750
|
|
|
POWERMATIC
" 66 "
TABLE SAW (CABINET)
.
Seller is getting out of the manufacturing business....call today....
Good condition
Price:
$ 965
|
|
|
SCMI
"SANDYA 7-S "
WIDE BELT (2-HEAD 43")
.
Company is getting out of the manufacturing business.....don't delay....
2005
Good condition
Price:
$ 25,900
|
|
|
ORIGINAL
"3512-03 "
RADIAL ARM SAW
.
NEW, NEVER BEEN USED!...
New, Never Used
Price:
$ 2,400
|
|
|
NORTHTECH
"NT-120E-HD "
EDGE SANDER (OSCILLATING)
.
Getting out of the manufacturing busines...call today....
2004
Very good condition
Price:
$ 2,700
|
|
|
WEEKE
"PE 108 "
FEED THROUGH BORING MACHINE
.
Esay set up & IDEAL for samll or large production runs!...
1997
Good condition
Price:
$ 12,500
|
|
|
RITTER
"R-8043 "
BORING (HORIZONTAL)
.
Getting out of the manufacturing busines...call today....
2005
Very good condition
Price:
$ 4,995
|
|
|
DELTA
"32-350 "
BORING (HORIZONTAL)
.
Seller is getting out of the manufacturing business......call today....
2005
Good condition
Price:
$ 1,950
|
|
|
THOMAS MFG
"RETURN CONVEYOR "
RETURN CONVEYOR
.
Getting out of the manufacturing business.....call today....
2005
Good condition
Price:
$ 10,250
|
|
|
WEEKE
"VANTAGE 33 "
CNC ROUTER W/ATC & BORING
.
Late "top of the line" model with less than 2700 hours run time. ...
2006
Very good condition
Price:
$ 59,900
|
|
|
WEEKE
"BHP 200 "
CNC ROUTER W/ATC & BORING
.
Why buy a new one when "one like this" is available immediately! ...
2006
Cleaned and checked
Price:
$ 84,900
|
|
|
CANTEK
"JC-309 "
KNIFE GRINDER
.
Getting out of the manufacturing busines...call today....
2005
Good condition
Price:
$ 9,950
|
|
|
BIESSE
"ROVER B 2.30 "
CNC MACHINING CENTER WITH ATC
.
Seller States " this machine has approx 24 months of total production time since purchased new in 2004...Dust Collector & assortment of tooling also INCULDED! ...
2004
Very good condition
Price:
$ 49,500
|
|
|
FELDER
"RL 200 "
DUST COLLECTOR
.
Ready to help clean up your shop!...
2008
Very good condition
Price:
$ 4,500
|
|
|
DANTHERM FILTRATION
"NFK 4HJ-1BL "
MODULAR DUST COLLECTION SYSTEM
.
Customer is getting out of the manufacturing business...call today....
2004
Good condition
Price:
$ 69,500
|
|
|
BRANDT
"KDN-530/C "
AUTOMATIC EDGEBANDER W/MICROPROCESSOR
.
No longer going to be in the manufacturing business...call today....
2004
Good condition
Price:
$ 31,900
|
|
|
NORTHTECH
"NT-610XL "
SINGLE SURFACE PLANER
.
Getting out of the manufacturing business...call today....
2005
Very good condition
Price:
$ 21,600
|
|
|
ALTENDORF
"WA-8 "
SLIDING TABLE SAW
.
Seller no longer in the manufacturing business....call today....
2004
Good condition
Price:
$ 9,990
|
|
|
L & L
"GLU-ALL "
GLUE ALL FREQUENCY PRESS
.
Getting out of the manufacturing business........call today....
Good condition
Price:
$ 5,500
|
|
|
HOLZMA
"HPP 350 "
FRONT LOAD, AUTOMATIC PANEL SAW
.
Company no longer in the manufacturing business.....call today....
2005
Very good condition
Price:
$ 74,900
|
|
|
LEADERMAC
"LMC-623C "
MOULDER
.
Company no longer in the manufacturing business.......call today....
2005
Very good condition
Price:
$ 34,000
|
|
|
WEINIG
"H 23C/1000 "
MOULDER (FEED THROUGH)
.
Great option in a spindle machine with PowerCom and spindle positioning!...
2008
Excellent condition
Price:
$ 139,900
|
|
|
MIDA
"P4E "
4-SIDED PLANER
.
A Machine like this doesn't come on the market often! ...
1984
Very good condition
Price:
$ 19,800
|
|
|
NEWMAN
"M-712 "
PLANER MATCHER
.
A Machine like this doesn't come on the market often! ...
1978
Very good condition
Price:
$ 177,800
|
|
|
MORBIDELLI
"AUTHOR 430 "
FLAT TABLE W/ATC, BORING & RAKE
.
A loaded Flat Table CNC with Material Push-Off, Rake, Loading Scissor Lift, and Dust Collector!...
2005
Very good condition
Price:
$ 73,900
|
|
|
UNKNOWN
"12" x 138" "
CONVEYOR (POWERED)
.
Conveyor and table were used on a straight line rip saw to return material stock. Must sell because of less room in new shop....
2004
Good condition
Price:
$ 3,500
|
|
|
CPM
"5HR19 "
HORIZONTAL COOLER (SINGLE PASS)
.
I would recommend this one to a friend - ANYTIME! ...
Very good condition
Price:
$ 9,500
|
|
|
SCMI
"S-63 "
SINGLE HEAD PLANER
.
Still in "pretty good" condition at a FRACTION of a new machine price! ...
1984
Good condition
Price:
$ 5,800
|
|
|
WESTERN PNEUMATICS
"30 U "
CHIP BIN
.
A very nice 30-Unit truck bin!...
Good condition
Price:
$ 23,000
|
|
|
MAGNETEK
"SDX-1250 "
DIESEL POWER GENERATOR SET
.
A lot of machine & equipment value for the money! ...
Fair Condition
Price:
$ 7,400
|
|
|
BRANDT
"KDF-660 2-C "
SINGLE SIDE W/PRE-MILL & CORNER ROUND
.
Located in the USA, a late model Brandt ready to find a new home....
2007
Very good condition
Price:
$ 64,900
|
|
|
WEEKE
"VENTURE 1 "
CNC P.T.P. MACHINING CENTER W/ATC
.
This one is packed & and ready for immediate delivery! ...
2006
Very good condition
Price:
$ 56,900
|
|
|
DIMTER
"OPTI CUT 200 "
OPTIMIZING CUT-OFF SYSTEM
.
Excellent opportunity in a late model cross cut!...
2006
Very good condition
Price:
$ 94,900
|
|
|
JET
"WSS-3-3 "
SHAPER WITH FEEDER
.
A lot of machine & equipment value for the money! ...
2000
Excellent condition
Price:
$ 2,200
|
|
|
DELTA
"UNISAW "
TABLE SAW (CABINET)
.
A lot of machine & equipment value for the money! ...
Excellent condition
Price:
$ 1,525
|
|
|
RITTER
"R-911 "
EDGE SANDER (NON-OSCILLATING)
.
This "barely used" 2004 "R-911" can be yours for 1/2 of NEW. - Give us a call!...
2004
Very good condition
Price:
$ 1,000
|
|
|
TIMESAVERS
"SPEEDSANDER "
WIDE BELT SANDER
.
Easy to use sander by TIMESAVERS....
2007
Good condition
Price:
$ 6,150
|
|
|
C.B.
"KRT1N 970 "
WIDE BELT SANDER
.
Stop hand sanding and get your speed upby using this for a faster better finish!...
1998
Excellent condition
Price:
$ 15,000
|
|
|
S A C
"T4 "
SINGLE END TENONER (NC CONTROLLED)
.
One of the best automated tenoners on the market!...
2002
Excellent condition
Price:
$ 31,990
|
|
|
HOMAG
"BAZ 41 "
CNC MACHINING CENTER/EDGE-BANDER W/HOT MELT
.
An exceptionally well-maintained machine with LOTS of aggregates & tooling included! ...
2000
Very good condition
Price:
€ 65,000
|
|
|
CUSTOM MADE
"AUGER BIN/SCREW CONVEYOR "
SURGE BIN
.
Great For Shavings, Saw Dust, Pelets, etc!...
Good condition
Price:
$ 7,500
|
|
|
AMS
"FA-800 "
VOLUMETRIC FILLING MACHINE
.
A lot of machine & equipment value for the money! ...
2008
Good condition
Price:
$ 5,650
|
|
|
CLARK
"CHY 160D "
FORK LIFT
.
This beast can be your for an incredible price!...
Good condition
Price:
$ 11,995
|
|
|
BRANDT
"KD 55 "
EDGEBANDER
.
This well taken cared of "KD 55" recently had a NEW REBUILT POT installed, & regular scheduled service visits. You cant go wrong. - Give us a call!...
1999
Very good condition
Price:
$ 10,995
|
|
|
MEREEN JOHNSON
"312-DC "
DIP CHAIN GANG RIP SAW
.
I would recommend this one to a friend - ANYTIME! ...
2005
Very good condition
Price:
$ 34,600
|
|
|
WEINIG
"U 23 E "
MOULDER (FEED THROUGH)
.
The best then and the best now -- 10 1/4" working width!...
1997
Very good condition
Price:
$ 39,500
|
|
|
HOLZMA
"HPP 11 "
FRONT LOAD, AUTOMATIC PANEL SAW W/VACUUM LOADING S
.
A true workhorse! ...
Good condition
Price:
€ 79,600
|
|
|
LEADERMAC
"LMC-623P "
MOULDER (FEED THROUGH)
.
Great 6 spindle moulder with heads and measuring stand -some knives!...
2006
Very good condition
Price:
$ 39,900
|
|
|
GMC
"KGS-515S "
VERTICAL PANEL SAW W/SCORING
.
Owner states: "This saw will Make you money & Save Space" - Give us a call!...
1999
Very good condition
Price:
$ 7,980
|
|
|
SCMI
"SI 16 W "
SLIDING TABLE SAW
.
Shop is closed down and owner has the saw in storage. - "We are open to a reasonable offer" - Give us a call!...
1989
Good condition
Price:
$ 7,475
|
|
|
C.F.NIELSEN
"BP 3200 "
BRIQUETTE PRESS (CYLINDRICAL)
.
Easy installation! Easy running in! Compact unit!...
2004
Very good condition
Price:
Call for price
|
|
|
OTT
"ATLANTIC "
EDGEBANDER W/MICRO-PROCESSOR
.
A lot of machine & equipment value for the money! ...
1997
Very good condition
Price:
$ 10,890
|
|
|
NORFIELD
"MAGNUM 95 "
PRE-HUNG & JAMB DOOR MACHINE
.
A Condition like this AND less than 1/2 PRICE of a NEW ONE! ...
1995
Very good condition
Price:
$ 19,800
|
|
|
NORFIELD
"3800 "
DOOR LITE CUT-OUT MACHINE
.
...
na
Fair condition
Price:
$ 10,000
|
|
|
RITTER
"R-46 "
BORING (2-HEAD LINEBORER)
.
A lot of machine & equipment value for the money! ...
1999
Very good condition
Price:
$ 5,950
|
|
|
POWERMATIC
" 2-A "
SINGLE END TENONER
.
American made equipment at an affordable price! ...
1968
Reconditioned
Price:
$ 1,380
|
|
|
GRANUTECH-SATURN
"ROTO-GRIND "
SHREDDER SYSTEM
.
A lot of machine & equipment value for the money! ...
Very good condition
Price:
Call for price
|
|
|
R-W-M
"W-500 "
MATERIAL HANDLING
.
Perfect for feeding multiple machines....
Good condition
Price:
Call for price
|
|
|
R-W-M
"W-500 "
MATERIAL HANDLING
.
Perfect for feeding multiple machines....
Good condition
Price:
Call for price
|
|
|
SMITHWAY
"XL-208 "
ROLL FEED GANG RIP SAW
.
A Machine like this doesn't come on the market often! ...
Good condition
Price:
$ 3,280
|
|
|
HALSTY
"37 "
WIDE BELT SANDER
.
Near New only used for about 1 yr before being replaced by new EQuipment, also with supply of new sanding belts various grits...
2001
Very good condition
Price:
$ 7,500
|
|
|
TOYOTA
"5FD35 "
FORK LIFT (SOLID TIRES)
.
Not in the best shape...but look at that price! You can afford to give it some TLC!...
1995
Fair condition
Price:
$ 2,295
|
|
|
BUSELLATO
"JET 200 RT "
CNC MACHINING CENTER
.
Price has been reduced! - Take it before somebody else snatches it away! ...
2005
Cleaned and checked
Price:
$ 49,999
|
|
|
GARDNER-DENVER
"EAQ99K "
AIR COMPRESSOR (ROTARY SCREW)
.
Under power & available for demo & inspection!...
2000
Good condition
Price:
$ 27,500
|
|
|
GARDNER-DENVER
"EBMQLE "
AIR COMPRESSOR (ROTARY SCREW)
.
under power & available for demo & inspection...
1996
Good condition
Price:
$ 22,500
|
|
|
HIROSS
"DXB 110 "
AIR DRYER (REFRIGERATED)
.
under power & available for demo & inspection...
1995
Good condition
Price:
$ 8,500
|
|
|
GARDNER-DENVER
"RDS800A "
AIR DRYER (REFRIGERATED)
.
under power & available for demo & inspection, used with AC-011024,...
2000
Good condition
Price:
$ 9,500
|
|
|
POWERMATIC
"221 "
SINGLE SURFACE PLANER
.
They don't BUILD them like this ANYMORE! ...
Reconditioned
Price:
$ 11,500
|
|
|
GRECO
"46 x 72 "
MEMBRANE VACUUM PRESS
.
Clamshell style press for limited space applications....
Good condition
Price:
$ 17,000
|
|
|
GRECO
"46 x 72 "
MEMBRANE VACUUM PRESS
.
Clamshell vacuum forming for doors or other products when vacuum pressing/forming space is limited....
Good condition
Price:
$ 17,000
|
|
|
GRECO
"48 x 96 "
MEMBRANE VACUUM PRESS
.
Nice compact clamshell style for vacuum forming vinyl and other materials....
Good condition
Price:
$ 17,000
|
|
|
JOOS
"JUNIOR "
HOT PRESS
.
A great press for 4 x 8 panels or similiar....
1995
Good condition
Price:
$ 11,000
|
|
|
UNKNOWN
"UNKNOWN "
INCLINE BELT CONVEYOR
.
Was used to move boards from moulder to chop saw!...
NA
Good condition
Price:
$ 1,350
|
|
|
WEINIG
"H 23C/1000 "
MOULDER (FEED THROUGH)
.
Let your Amish friends know -- moulder does not include motors!...
2007
Good condition
Price:
$ 75,000
|
|
|
LOBO
"SM-623L "
FEED THROUGH MOULDER
.
Great way to strat moulding!!...
2004
Very good condition
Price:
$ 17,500
|
|
|
WEINIG
"QUATTROMAT 23P "
MOULDER
.
Great starter machine for moulding and cabinet profiles!...
1999
Very good condition
Price:
$ 16,900
|
|
|
SICAR
"18 H5 "
MOULDER (FEED THROUGH)
.
Thes last for years, get started today -- make your own moulding!...
1985
Good condition
Price:
$ 6,490
|
|
|
CEMCO
"1000 "
WIDE BELT SANDER
.
Great price for a CEMCO sander....
1995
Good condition
Price:
$ 5,900
|
|
|
MEBER
"SR/900 R1 "
BAND SAW (RESAW)
.
Large capacity resaw; cleaned and checked!...
Cleaned and checked
Price:
$ 7,500
|
|
|
BUSELLATO
"JET 200 RT "
CNC ROUTER (NESTED-BASE)
.
CONDITION REPORT DONE BY CERTIFIED DEL-MAC TECHNICIAN!
The Jet 200 tested ok. It is in good condition.
Tested:
X,Y, Z axis; All axis checked ok.
Electrospindle started up and ran with no problems. I made a program and picked up a tool from the carousel to check for alignment. The manual push button on the tool magazine tested ok. I ran the boring head and checked all the electrovalves for each bit location. The unloading device function was also tested. The wiring and airlines on the machine are in good condition.
This is a list of the features on the Jet 200 RT:
Evoulution Control 7.0, (2) working areas N,M , set up for pendulum processing, auto lube, equipped with feed rate override, boring head has drills 1 thru 9 in y, 9 thru 19 in x (32mm) spacing, horizontal drills (1) in y (3) in x. boring head is equipped with saw that accepts 120mm blade, electrospindle is Omlat 18000 rpm max, (15) position tool changer, (1) tool holder at end of machine for large aggregates, it has (4) reference pins on front (1) on each end of machine
Safety Features: Safety mats on front of RT has 3 zones, safety cable, fence surrounds back of RT with gate interlock, push off table
CRATED AND READY TO BE SHIPPED...
2007
Excellent condition
Price:
$ 110,000
|
|
|