BINNS & BERRY
|Year of Mfg.:||1968|
|Elect./Voltage:||460 V, 60 Cy, 3 Ph.|
|Value New:||Please call|
|Region:||MIDWEST (Click for Regional Map)|
BINNS & BERRY MARKIII-TB 25"/46" X 109" Gap Bed Lathe
Swing over bed ways gap closed max. 25"
Swing through the gap max. 46"
Gap length 11.625"
Distance between centers 120"
Swing over cross slide max. 15"
Spindle Bore 4.125"
Number of spindle speeds 16
Spindle speeds range 12-600 RPM
Number of threads - Inch: 60
Inch threads 1-56 TPI
Cross feeds range 120
Longitudinal feeds range .0005-.156 IPR
Tailstock spindle travel 14"
Tailstock spindle diameter 4"
Machine dimensions approx 185" x 80" x 75"
Machine weight approx 10,000 Lbs.
30" independent 4-jaw chuck
Square turret tool post
7.5" traveling steady rest
14.5" stationary steady rest
Full length coolant/chip pan
|Written By:||Marvin Spehar|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning. They are used in the manufacture of cylindrically shaped products. In the case of larger pieces, steady rests may be used to support the workiece. Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks. They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.