For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Marvin Spehar ext.452


Model:   4025NK
Machine Type:  


Year of Mfg.:   N/A
Condition:   Very good condition   
Elect./Voltage:   440 V, 60 Cy, 3 Ph.
Value New:   $ 210,000
Price:   $ 85,000 USD     (Convert)
Financing: $ 1,699 National Capital Leasing
Region:   NORTHEAST (Click for Regional Map)
EXF #:   TQ-010885  
Description:   (view full)

LEBLOND 4025NK Heavy Duty Sliding Bed Gap Lathe

  Swing over bed and carriage wings  34 1/2".

  Swing over cross slide 23 1/2".

  Swing over gap 130".

  Distance between centers, bed closed 132".

  Distance between centers, bed opened 216".

  (36) Spindle speeds, in 3 ranges  4.5 to 500 RPM.

  Spindle nose, American Standard, size A1-11.

  Spindle bore  3 1/16".

  Headstock and tailstock spindle center taper  #6 MORSE.

  (48) Feeds, longitudinal  .004 TO .250 I P R.

  (48) Threads   3.4 TO 46 TPI.

  Tailstock spindle travel   18".

  Tailstock spindle diameter  6 1/2".

  Approximate floor space with bed closed: 242"l-r x 102" f-b x 114" h.

  Approximate weight: 50,000 Lbs.

Equipped With:

  Power operated sliding bed for increased swing and center distance.

  Hardened and ground steel bed ways on upper bed and cross slide ways.

  Four-directional power rapid traverse.

  38" Diameter four-jaw chuck with reversible jaws.

  25" Diameter face plate.

  15" Diameter capacity four-point roller-type steady rest.

  Square toolpost.

  25 H.P. spindle drive motor and electrical controls.


    Special Note: SOLD
    Written By: Bill Merrigan  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning.  They are used in the manufacture of cylindrically shaped products.  In the case of larger pieces, steady rests may be used to support the workiece.  Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks.  They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.