You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals.
Click here to view all literature

For Immediate Answers Contact:
Karl Balg
(800) 374-5009 ext.  355
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Bob Bullin ext 346

EXF #:   EO-012285  


Machine Type:  


Year of Mfg.:   2016
Condition:   Very good condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New: $ 73,000  
Price: $ 36,500    Act Now!
Financing:   $ 742 National Capital Leasing
Region:   WEST COAST (Click for Regional Map)


HOLZ-HER STREAMER 1057 ... Edgebander with Pre-Milling & Corner Rounding

Min/Max. 0.4 - 6 mm Edge Cap; 8 - 60 mm panel thickness;  Min. panel length 160 mm. Feed-speed, 10 m/Min (33 FPM) single speed.

Equipped With:

  • Pre-Milling, (2) vertical spindles, counter rotating with jump action and manually adjustable in-feed fence.
  • HOLZ-HER "GLU JET" Cartridge System and flat glue nozzle applicator. Glue heat up time 2 to 3 minutes max!
  • Pressure Section: With (1) large dia. drive roller & (2) pneumatic pressure controlled idle rollers, horizontal adjustment w/digital indicator.
  • Automatic Edge Magazine: For coil and strip feed.

  • End Trimming Unit: Double motor end trims travel on 45° slides; tilt from 0° to 15°.
  •  Multi Function Trimming Unit: Top & Bottom trim station for flush/bevel/radius with digital readouts.
  • Corner Rounding Unit: (1) Motor, for radius/bevel vertical edge trimming max. 60 mm panel thickness.
  • Profile Scraping Unit: Top and bottom radius scraping unit with mechanical digital readouts  positioning.
  • Buffing Unit: (2) Motor top and bottom buffing.

    Compact Controls,
    with swivel control panel at eye height, dual digital thermostats, manual push button on/off switches for glue heat-up, edge magazine and all work-stations.
    Complete With:
    Safety/Sound Hood over all wok-stations, fixed panel support out-rigger, manually adjustable hold-down beam. Original factory documentation. Used tooling on the machine.

    Note: This machine will be available the 2nd week in September.
Questions? For Instant Communication, Click Here
Special Note:
Comment: HOLZ-HER Streamer - fully equipped and easy to operate!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Karl Balg
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions