You are not logged in.    Login  |  Register  |  Help
 
 

 
We are awaiting video for this item from the principals. We are awaiting literature from the principals.

For Immediate Answers Contact:
Bill Christoffersen
(800) 374-5009 ext.  365
Intl. +1 (704) 841-2001
bill.christoffersen@exfactory.com





If not available, try his/her backup:
Michel Hamel ext 472
michel.hamel@exfactory.com


EXF #:   DB-010282  
Brand/Model:  

ASTEC 10X60

Machine Type:  

DRYER (ROTARY DRUM)

Year of Mfg.:   2015
Condition:   Good Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 1,200,000    Act Now!
Price: Please Call     (Convert)
Financing:   National Capital Leasing
Region:   SOUTH (Click for Regional Map)

Description:

ASTEC Rotary Hot Oil Tube Type Indirect Dryer for wood and other products;

Complete with the following components and features:

  • 10 Ft. x 60 Ft., Carbon Steel, Rotary Drum.
  • 40 TPH design capacity.
  • Hopper and Screw Feeder.
  • End Discharge with Hood and a stainless steel Auger Discharge.
  • Hot oil Inlet and Outlet Manifold.
  • Trunnions & Support Structure.
  • 75 HP Drum Drive Motor and reducer, (ratio 64.42 to 1) with chain & sprocket.
  • Control Panel with SIEMENS PLC Controller. 
  • Thrust Idler Hydraulic Pump Panel.
  • Hot Oil Pump Skid Consisting Of:
      
     ● (3) BLACKMER System-One Centrifugal Pumps, Model FRM, 316 Stainless Steel. Size 8 X 10-13, approximate 4200 gallons per minute at 110' head at 275 psi at 100 degrees F. Each driven by a 100 HP Motor.
       ● (3) Strainers with miscellaneous Piping and Valves.
       ● (1) XYLEM 2-pass carbon steel shell & tube Heat Exchanger. Shell rated 125 psi at 1600 degrees F., tubes 150 psi at 1375 degrees F.
  • HEATEC Convectec Hot Oil Heater complete with a Control Panel, Expansion Tank and (1) TWIN CITY fan, size 917, Type RBO-SW. Driven by a 15 HP Motor.  Operating temperature up to 550° F. output and re-circulation input of 490° F. input.

    NOTES:  ● Dryer, Pump Skid, or Heatec may be purchased separately.  ● System last used with drying wood chips from 45% down to 10% moisture.   To save on gas fuel costs, the system was originally mostly heated with a bark burner which has been sold.  The Heatec has another burner which was originally also connected is rated for 40 MM BTUs and other gas burners up to 100 MM BTUs are available.  ● Professional rigging and loading available.
Special Note: New Arrival
Comment: A complete system with low risk of fire in the dryer!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Bill Christoffersen
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions