SCMI Olimpic K 360, ... Compact Edgebander with Pre-Milling & Corner Rounding.
Edge Capacity, 0.4 to 6 mm (0.016 to 1/4") for strip feeding.
Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2").
- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning.
- Pre-Milling Station, RT-VP: Spindles 2 x 2.0 HP, 19,000 RPM, (1) with PLC controlled jump action and diamond cutter heads
- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils.
- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min.
- Pressure Section: Manual digital positioning, (3) pressure rollers, first larger, Teflon coated and powered.
- End Trimming Station: Front & rear 2 x 0.25 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder.
- Top & Bottom Trimming Unit: Remote (via control panel) pneumatic positioning for (3) settings, flush/bevel/radius trimming, 2 x 0.7 HP - 12.000 RPM motors with precision digital indicators for quick setup.
- Corner Rounding Unit: For top & bottom of leading & trailing corner when edgebanding all (4) sides, 1 x 0.5 HP - 12000 RPM motor. Equipped with 3 mm radius diamond cutter-head.
- Top & Bottom Profile Scraping Unit "RAS/V": Manual pre-set up with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning.
- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean.
- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.
- Orion 1 Plus Controller, fixed at in-feed of machine. with soft keys, graphics and 4" LCD display panel. It handles most machine set-up functions and workstations.
- Feed-speed, 36 FPM fixed, 1 x 2.0 HP feed drive motor, 200 Hz frequency inverter for all trimming units, manual adjustable hold-down pressure beam, full sound enclosure cover and outboard panel support.
Actual Model: OLIMPIC K 360 T-ER1